ru.unix.bsd

 
 - RU.UNIX.BSD ------------------------------------------------------------------
 From : Igor A. Valcov                       2:5020/400     01 Jun 2004  20:45:21
 To : All
 Subject : Глобальные проблемы с FreeBSD-4.10-RELEASE
 -------------------------------------------------------------------------------- 
 

 Всем привет!
 
 Уже длительное время не могу решить проблемы с устройствами. Hе 
 получается всё заставить работать одновременно. В частности, если я 
 включу поддержку usb, то перестаёт работать внутренний модем 
 (аппаратный). Каждый раз, как только надо им воспользоваться приходится 
 лезть в BIOS и отключать поддержку USB. Тогда работает нормально.
 
 Все проблемы с модемом, видимо, из-за этих строчек в dmesg:
 pci2: <PCI bus> on pcib2
 sio0: configured irq 9 not in bitmap of probed irqs 0x800
 sio0: <3COM PCI FaxModem> port 0x9000-0x9007 irq 9 at device 0.0 on pci2
 sio0: moving to sio2
 sio2: type 16550A
 
 то есть 9-е прерывание не хочет нормально давать модему....
 
 Вот вывод dmesg полностью:
 
 Copyright (c) 1992-2004 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
   The Regents of the University of California. All rights reserved.
 FreeBSD 4.10-RELEASE #0: Tue Jun  1 18:39:10 MSD 2004
      root@alpha-viaprog.homenet:/usr/src/sys/compile/VIAPROG
 Timecounter "i8254"  frequency 1193182 Hz
 CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1817.91-MHz 686-class CPU)
    Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  
 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
 V,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
 real memory  = 268369920 (262080K bytes)
 avail memory = 255344640 (249360K bytes)
 Programming 24 pins in IOAPIC #0
 IOAPIC #0 intpin 2 -> irq 0
 FreeBSD/SMP: Multiprocessor motherboard: 1 CPUs
   cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
   io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
 Preloaded elf kernel "kernel" at 0xc05a3000.
 Preloaded elf module "nvidia.ko" at 0xc05a309c.
 Warning: Pentium 4 CPU: PSE disabled
 Pentium Pro MTRR support enabled
 md0: Malloc disk
 Using $PIR table, 9 entries at 0xc00fded0
 apm0: <APM BIOS> on motherboard
 apm0: found APM BIOS v1.2, connected at v1.2
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 pcib0: <Intel 82845 Host to PCI bridge> on motherboard
 IOAPIC #0 intpin 16 -> irq 2
 IOAPIC #0 intpin 19 -> irq 5
 IOAPIC #0 intpin 18 -> irq 9
 IOAPIC #0 intpin 23 -> irq 10
 IOAPIC #0 intpin 17 -> irq 11
 pci0: <PCI bus> on pcib0
 agp0: <Intel 82845 host to AGP bridge> mem 0xd0000000-0xd7ffffff at 
 device 0.0 on pci0
 pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
 pci1: <PCI bus> on pcib1
 nvidia0: <GeForce4 MX 440> mem 
 0xe0000000-0xe007ffff,0xd8000000-0xdfffffff,0xe8000000-0xe8ffffff irq 2 
 at device 0.0 on pci1
 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f 
 irq 2 at device 29.0 on pci0
 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb000-0xb01f 
 irq 5 at device 29.1 on pci0
 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb400-0xb41f 
 irq 9 at device 29.2 on pci0
 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
 usb2: USB revision 1.0
 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 pci0: <USB controller> at 29.7 irq 10
 pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
 IOAPIC #0 intpin 21 -> irq 16
 IOAPIC #0 intpin 22 -> irq 17
 pci2: <PCI bus> on pcib2
 sio0: configured irq 9 not in bitmap of probed irqs 0x800
 sio0: <3COM PCI FaxModem> port 0x9000-0x9007 irq 9 at device 0.0 on pci2
 sio0: moving to sio2
 sio2: type 16550A
 rl0: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem 
 0xeb004000-0xeb0040ff irq 16 at device 1.0 on pci2
 rl0: Ethernet address: 00:05:1c:18:5f:50
 miibus0: <MII bus> on rl0
 rlphy0: <RealTek internal media interface> on miibus0
 rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 atapci0: <Promise TX2 ATA133 controller> port 
 0xa800-0xa80f,0xa400-0xa403,0xa000-0xa007,0x9c00-0x9c03,0x9800-0x9807 
 mem 0xeb000000-0xeb003fff irq 17 at device 2.0 on pci2
 ata2: at 0x9800 on atapci0
 ata3: at 0xa000 on atapci0
 isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci1: <Intel ICH4 ATA100 controller> port 
 0xcc00-0xcc0f,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07 
 irq 2 at device 31.1 on pci0
 ata0: at 0x1f0 irq 14 on atapci1
 ata1: at 0x170 irq 15 on atapci1
 pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 11
 pcm0: <Intel ICH4 (82801DB)> port 0xd800-0xd83f,0xd400-0xd4ff mem 
 0xec003000-0xec0030ff,0xec002000-0xec0021ff irq 11 at device 31.5 on pci0
 pcm0: <Avance Logic ALC650 AC97 Codec>
 orm0: <Option ROM> at iomem 0xd0000-0xd27ff on isa0
 pmtimer0 on isa0
 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
 kbd0 at atkbd0
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: model IntelliMouse, device ID 3
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 sio0: type 16550A
 sio1 at port 0x2f8-0x2ff irq 3 on isa0
 sio1: type 16550A
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
 ppbus0: IEEE1284 device found /NIBBLE
 Probing for PnP devices on ppbus0:
 ppbus0: <Canon BJC-1000/1.30> PRINTER BJL,BJRaster,BSCC,TXT01
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master UDMA100
 ad4: 190782MB <ST3200822A> [387621/16/63] at ata2-master UDMA100
 ad6: 38166MB <ST340810A> [77545/16/63] at ata3-master UDMA100
 acd0: CD-RW <RICOH CD-RW MP7400A R107 20020620> at ata1-master UDMA33
 Mounting root from ufs:/dev/ad0s1a
 cd0 at ata1 bus 0 target 0 lun 0
 cd0: <RICOH CD-RW MP7400A R107> Removable CD-ROM SCSI-0 device
 cd0: 33.000MB/s transfers
 cd0: Attempt to query device size failed: NOT READY, Medium not present
 
 Вот конфиг ядра:
 
 machine    i386
 cpu    I686_CPU
 ident     VIAPROG
 maxusers  0
 
 options   CPU_ENABLE_SSE
 options   CPU_FASTER_5X86_FPU
 
 options   INET     #InterNETworking
 options    INET6      #IPv6 Networking
 options   FFS      #Berkeley Fast Filesystem
 options   FFS_ROOT    #FFS usable as root device [keep this!]
 options   SOFTUPDATES     #Enable FFS soft updates support
 options   UFS_DIRHASH     #Improve performance on big directories
 options   MFS      #Memory Filesystem
 options   MD_ROOT      #MD is a potential root device
 options   MSDOSFS      #MSDOS Filesystem
 options   CD9660      #ISO 9660 Filesystem
 options   CD9660_ROOT     #CD-ROM usable as root, CD9660 required
 options   PROCFS      #Process filesystem
 options    EXT2FS      #Linux Ext2FS file system
 options   COMPAT_43    #Compatible with BSD 4.3 [KEEP THIS!]
 options   SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
 options   UCONSOLE    #Allow users to grab the console
 options   USERCONFIG   #boot -c editor
 options   VISUAL_USERCONFIG   #visual boot -c editor
 options   KTRACE      #ktrace(1) support
 options   SYSVSHM      #SYSV-style shared memory
 options   SYSVMSG      #SYSV-style message queues
 options   SYSVSEM      #SYSV-style semaphores
 options   P1003_1B    #Posix P1003_1B real-time extensions
 options   _KPOSIX_PRIORITY_SCHEDULING
 options   ICMP_BANDLIM    #Rate limit bad replies
 options   KBD_INSTALL_CDEV # install a CDEV entry in /dev
 options   AHC_REG_PRETTY_PRINT # Print register bitfields in debug
           # output.  Adds ~128k to driver.
 options   AHD_REG_PRETTY_PRINT # Print register bitfields in debug
           # output.  Adds ~215k to driver.
 options    USER_LDT
 options    COMPAT_LINUX
 
 options    QUOTA
 
 options    SMP
 options    APIC_IO
 
 device    isa
 device    pci
 
 # Floppy drives
 device    fdc0 at isa? port IO_FD1 irq 6 drq 2
 device    fd0  at fdc0 drive 0
 
 # ATA and ATAPI devices
 device    ata0 at isa? port IO_WD1 irq 14
 device    ata1 at isa? port IO_WD2 irq 15
 device    ata
 device    atadisk      # ATA disk drives
 device    atapicd      # ATAPI CDROM drives
 device          atapicam   # emulate ATAPI devices as SCSI ditto via CAM
 options   ATA_STATIC_ID    # Static device numbering
 
 # atkbdc0 controls both the keyboard and the PS/2 mouse
 device    atkbdc0  at isa? port IO_KBD
 device    atkbd0  at atkbdc? irq 1 flags 0x1
 device    psm0 at atkbdc? irq 12
 
 device    vga0 at isa?
 
 # splash screen/screen saver
 pseudo-device  splash
 
 # syscons is the default console driver, resembling an SCO console
 device    sc0  at isa? flags 0x100
 
 device    agp     # support several AGP chipsets
 
 # Floating point support - do not disable.
 device    npx0 at nexus? port IO_NPX irq 13
 
 # Power management support (see LINT for more options)
 device    apm0 at nexus? flags 0x20
 
 # Serial (COM) ports
 device    sio0 at isa? port IO_COM1 flags 0x10 irq 4
 device    sio1 at isa? port IO_COM2 irq 3
 
 # Parallel port
 device    ppc0 at isa? irq 7
 device    ppbus    # Parallel port bus (required)
 device    lpt     # Printer
 device    ppi     # Parallel port interface device
 
 # PCI Ethernet NICs that use the common MII bus controller code.
 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
 device          miibus          # MII bus support
 device    rl   # RealTek 8129/8139
 
 # Pseudo devices - the number indicates how many units to allocate.
 pseudo-device  loop    # Network loopback
 pseudo-device  ether   # Ethernet support
 pseudo-device  ppp 1  # Kernel PPP
 pseudo-device  pty    # Pseudo-ttys (telnet etc)
 pseudo-device  md     # Memory "disks"
 
 pseudo-device  bpf    #Berkeley packet filter
 
 device    pcm
 
 device          scbus                   #base SCSI code
 device          da                      #SCSI direct access devices (aka 
 disks)
 device          cd                      #SCSI CD-ROMs
 device          pass                    #CAM passthrough driver
 
 device          usb
 device          uhci
 device          umass
 
 Что можно предпринять?
 
 И ещё, стабильности работы нету вообще никакой.
 При проигрывании по нескольким каналам vchans музыки одновременно, через 
 некоторое время самопроизвольно, без всяких предупреждений следует 
 перезагрузка.
 Далее, подключал я цифровой фотик к usb. Оно его нашло, всё ok.. потом 
 такая досада... отошёл контакт в аккумуляторе там. Т.е. он выключился... 
 и тут же на консоли появился
 
 Fatal trap 12
 Syncyng disks
 Rebooting..
 
 Следует отметить, что на аппаратуру валить нечего, так как Linux работал 
 превосходно. Hикаких проблем не было вообще. То есть все проблемы во 
 FreeBSD носят чисто программный характер.
 
 Вообще жуть.
 Что посоветуете?
 -- 
 Igor A. Valcov
 --- ifmail v.2.15dev5.3
  * Origin: VoronezhSvyazInform ISP News Server (2:5020/400)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор