|
ru.unix.bsd
- RU.UNIX.BSD ------------------------------------------------------------------
From : Juriy Goloveshkin 2:5020/1930.1 26 Jul 2000 17:12:23
To : Andrey Derugin
Subject : Как настроить печать из под FreeBSD 4.0 через HP JetDirect EX Plu
--------------------------------------------------------------------------------
At 26 Jul 00 02:14:12, Andrey Derugin wrote to All:
AD> Уточнил.
AD> У меня J2591A, однопортовый !
AD> И нет в нем никакого lpd.
сам виноват. у тебя видимо firmware старая:
>===== Start cut [/home/ftp/incoming/README.TXT] =====<
*********************************************************************
HP Download Manager Firmware Revision E.08.20
April 2000
*********************************************************************
1 - Product Numbers Upgradeable Using This Firmware Image
J2591A - EX+ Ethernet External Print Server
*********************************************************************
2 - JetDirect features/enhancements provided in the E.08.20 firmware
*********************************************************************
E.08.20 is a major release for the EX+ platform. With this version,
the EX+ now contains all known defect fixes associated with the
functionality implemented by the EX+. In addition, the following new
features were implemented.
1) Multiple TCP Connections
2) Support for WebJetadmin Alerts with standard printer mib compliant
printers.
3) Support for Novell configuration with Network Printer Installer or
Simple Device Installation
4) Enhanced Security
5) All the Defect Fixes Incorporated From A.05.05 to X.08.06
>6) Support for the lpd "AUTO" queue for automatic text / raw sensing
7) Support for the bootptab parameter T151="BOOTP-ONLY" for
environments which run both DHCP and BOOTP and require HP JetDirect
to be a BOOTP only device.
8) Support for Access Control List (ACL) modification via telnet using
the "allow" command.
9) Support for "arp -s" IP configuration for assigning an IP address
to a JetDirect device. For an unconfigured JetDirect card, use
"arp -s" on your system to setup a static mapping between the IP
address you want JetDirect to use and the MAC address of the
JetDirect card. At this point, use the "ping" command to ping
the JetDirect card. JetDirect will glean its IP address from the
ping packet.
10) HP JetDirect has added the capability to define TCP ports to print
to in addition to 9100. This capability is useful for applications
that are setup to utilize TCP ports other than 9100. To enable this
feature, additional telnet commands are provided:
To add a new raw port
addrawport: xxxx
To delete an existing port
deleterawport: xxxx
To display the current list of raw ports
listrawport:
where xxxx is a decimal number between 3000 and 9000 inclusive.
For multiple physical port products (EX+3 / 500X) the "port" command
is used to key which physical port to associate the new TCP port with.
Up to 2 additional "raw ports" can be defined per physical port. In
other words, the EX+3 and 500X products can support 6 user defined raw
ports and other products can support 2.
NOTE: Due To Space Limitations, The Internet Printing Protocol (IPP),
The Embedded Web Server (EWS), and the File Transfer Protocol (FTP) Were
Not Implemented For E.08.20. Also, support for scanning is not provided.
*********************************************************************
>===== End cut [/home/ftp/incoming/README.TXT] =====<
Bye
--- QDed beta v1.3.5/FreeBSD
* Origin: QDed default origin. (2:5020/1930.1)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
