Frozen Fido : RU.UNIX.BSD : ....

ru.unix.bsd

 
 - RU.UNIX.BSD ------------------------------------------------------------------
 From : Oleg Palamarchuk                     2:6055/44.17   31 Aug 2002  21:21:00
 To : All
 Subject : ....
 --------------------------------------------------------------------------------

 
 Сначала информация о системе (pnp в bios выключил).
 
 Copyright (c) 1992-2001 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
     The Regents of the University of California. All rights reserved.
 FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
     murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
 Timecounter "i8254"  frequency 1193182 Hz
 CPU: Pentium III/Pentium III Xeon/Celeron (1312.93-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
   Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C 
 MOV,PAT,PSE36,MMX,FXSR,SSE>
 real memory  = 469676032 (458668K bytes)
 avail memory = 452599808 (441992K bytes)
 Preloaded elf kernel "kernel" at 0xc0480000.
 Pentium Pro MTRR support enabled
 md0: Malloc disk
 Using $PIR table, 11 entries at 0xc00f13a0
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 pcib0: <Host to PCI bridge> on motherboard
 pci0: <PCI bus> on pcib0
 pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
 pci1: <PCI bus> on pcib1
 pci1: <S3 Trio3D/2X graphics accelerator> at 0.0 irq 11
 pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
 pci2: <PCI bus> on pcib2
 rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xf3800000-0xf38000ff
 irq 9 at device 12.0 on pci2
 rl0: Ethernet address: 00:a0:d2:a4:76:02
 miibus0: <MII bus> on rl0
 rlphy0: <RealTek internal media interface> on miibus0
 rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pci2: <unknown card> (vendor=0x1102, dev=0x0002) at 13.0 irq 9
 pci2: <unknown card> (vendor=0x1102, dev=0x7002) at 13.1
 isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on
 pci0
 ata0: at 0x1f0 irq 14 on atapci0
 ata1: at 0x170 irq 15 on atapci0
 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 
 at device 31.2 on pci0
 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 ums0: Logitech N48, rev 1.00/4.01, addr 2, iclass 3/1
 ums0: 3 buttons and Z dir.
 pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 
 at device 31.4 on pci0
 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
 kbd0 at atkbd0
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 sio0: type 16550A
 sio1 at port 0x2f8-0x2ff irq 3 on isa0
 sio1: type 16550A
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/9 bytes threshold
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ata0-master: ata_command: timeout waiting for intr
 ata0-master: identify failed
 ad3: 14660MB <FUJITSU MPF3153AH> [29786/16/63] at ata1-slave UDMA66
 acd0: CD-RW <MATSHITA CD-RW CW-7586> at ata0-slave using PIO4
 Mounting root from ufs:/dev/ad3s2a
 
 > -----------------
 
 ata-master винт на 40 не видит. это лечится простыми решениями?
 
 далее. присваиваю адрес сетевухе.
 
 ifconfig rl0 inet 192.168.0.1
 
 rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
     inet6 fe80::2a0:d2ff:fea4:7602%rl0 prefixlen 64 scopeid 0x1
     inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
     ether 00:a0:d2:a4:76:02
     media: Ethernet autoselect (100baseTX)
     status: active
 lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
     inet6 ::1 prefixlen 128
     inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
     inet 127.0.0.1 netmask 0xff000000
 ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
 sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
 faith0: flags=8000<MULTICAST> mtu 1500
 
 пытаюсь пинговать соседей по локалке - host down.
 
 себя пингует.
 
 PING 192.168.0.1 (192.168.0.1): 56 data bytes
 64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=0.059 ms
 64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.013 ms
 
 -+- 192.168.0.1 ping statistics ---
 2 packets transmitted, 2 packets received, 0% packet loss
 round-trip min/avg/max/stddev = 0.013/0.036/0.059/0.023 ms
 
 в hosts прописал на всякий случай.
 
 почему? что-то забыл, видимо?
 
 p.s. хочется "расшарить" каталог. man что ?
 
 p.p.s. что за тупость этот vi, edit гораздо удобнее. как в mc сделать вызов
        edit вместо vi?
 ---
  * Origin: music off (2:6055/44.17)

Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор

Тема:	Автор:	Дата:
....	Oleg Palamarchuk	31 Aug 2002 21:21:00
Re: ....	Valentin Nechayev	01 Sep 2002 12:55:21
Re: ....	Eugene Grosbein	01 Sep 2002 18:00:33

Архивное /ru.unix.bsd/33583d70fcb9.html, оценка 2 из 5, голосов 10