ru.unix.bsd

 
 - RU.UNIX.BSD ------------------------------------------------------------------
 From : Oleg Palamarchuk                     2:6055/44.17   26 Aug 2002  09:05:30
 To : All
 Subject : не видит винт
 -------------------------------------------------------------------------------- 
 

 
 
 Hе видит quantum as 40. хотя биос видит нормально. И еще, как этой сетевой карте
 присвоить айпи?
 
 dmesg
 
 Copyright (c) 1992-2001 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
     The Regents of the University of California. All rights reserved.
 FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
     murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
 Timecounter "i8254"  frequency 1193182 Hz
 CPU: Pentium III/Pentium III Xeon/Celeron (1442.56-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
   Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C 
 MOV,PAT,PSE36,MMX,FXSR,SSE>
 real memory  = 469676032 (458668K bytes)
 avail memory = 452599808 (441992K bytes)
 Preloaded elf kernel "kernel" at 0xc0480000.
 Pentium Pro MTRR support enabled
 md0: Malloc disk
 Using $PIR table, 11 entries at 0xc00f13a0
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 pcib0: <Host to PCI bridge> on motherboard
 pci0: <PCI bus> on pcib0
 pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
 pci1: <PCI bus> on pcib1
 pci1: <S3 Trio3D/2X graphics accelerator> at 0.0 irq 11
 pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
 pci2: <PCI bus> on pcib2
 rl0: <RealTek 8139 10/100BaseTX> at device 12.0 on pci2
 rl0: couldn't map ports/memory
 device_probe_and_attach: rl0 attach returned 6
 pci2: <unknown card> (vendor=0x1102, dev=0x0002) at 13.0
 pci2: <unknown card> (vendor=0x1102, dev=0x7002) at 13.1
 isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on
 pci0
 ata0: at 0x1f0 irq 14 on atapci0
 ata1: at 0x170 irq 15 on atapci0
 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 
 at device 31.2 on pci0
 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 ums0: Logitech N48, rev 1.00/4.01, addr 2, iclass 3/1
 ums0: 3 buttons and Z dir.
 pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 
 at device 31.4 on pci0
 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
 kbd0 at atkbd0
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 sio0: type 16550A
 sio1 at port 0x2f8-0x2ff irq 3 on isa0
 sio1: type 16550A
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/9 bytes threshold
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 
 >ata0-master: ata_command: timeout waiting for intr
 >ata0-master: identify failed
 
 ad3: 14660MB <FUJITSU MPF3153AH> [29786/16/63] at ata1-slave UDMA66
 acd0: CD-RW <MATSHITA CD-RW CW-7586> at ata0-slave using PIO4
 Mounting root from ufs:/dev/ad3s2a
 vnode_pager: *** WARNING *** stale FS getpages
 No strategy for buffer at 0xca772088
 : 0xd2634300: type VREG, usecount 4, writecount 0, refcount 0, flags (VOBJBUF)
     tag VT_PROCFS, type 7, pid 269, mode 180, flags 0
 : 0xd2634300: type VREG, usecount 4, writecount 0, refcount 0, flags (VOBJBUF)
     tag VT_PROCFS, type 7, pid 269, mode 180, flags 0
 vnode_pager_getpages: I/O read error
 vm_fault: pager read error, pid 269 (midc)
 pid 269 (midc), uid 0: exited on signal 11
 
 ---
  * Origin: music off (2:6055/44.17)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор 

Тема:    Автор:    Дата:    не видит винт   Oleg Palamarchuk   26 Aug 2002 09:05:30   Re: не видит винт   Eugene Grosbein   27 Aug 2002 10:10:06   не видит винт   Kardanev Alexandre   27 Aug 2002 13:37:26