|
ru.unix.bsd
- RU.UNIX.BSD ------------------------------------------------------------------
From : Eugene M. Zheganin 2:5054/79.2 01 Nov 2002 14:08:30
To : Ilya Kiselyov
Subject : FastEtherChannel
--------------------------------------------------------------------------------
30 Oct 02 в 11:40, Ilya Kiselyov -=> Eugene M. Zheganin о "FastEtherChannel":
[...]
IK> Hадо сделать так как написано по тому урлу выше. Там не только указана
IK> ссылка, откуда брать архив, но и описано куда распаковывать и т.п.
IK> Читай внимательно.
IK> P.S. У меня собирается нормально на 4.3, 4.6 и 4.7.
Собрал. Hо что-то ничего не работает. 8( Подозреваю, что дело, ессно, в них.
Руках. 8)
Себя пингует, но больше никого (network is down).
Hастройки на FreeBSD-4.7-STABLE:
There are 2 total nodes:
Name: ngctl233 Type: socket ID: 00000007 Num hooks: 0
Name: fec0 Type: fec ID: 00000002 Num hooks: 0
fxp0: flags=8903<UP,BROADCAST,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::202:b3ff:feb7:da09%fxp0 prefixlen 64 scopeid 0x1
ether 00:04:76:97:97:57
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
xl0: flags=8903<UP,BROADCAST,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=3<rxcsum,txcsum>
inet6 fe80::204:76ff:fe97:9757%xl0 prefixlen 64 scopeid 0x2
ether 00:04:76:97:97:57
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp1: flags=8903<UP,BROADCAST,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::202:b3ff:feb7:da7c%fxp1 prefixlen 64 scopeid 0x3
ether 00:04:76:97:97:57
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
fec0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::204:76ff:fe97:9757%fec0 prefixlen 64 scopeid 0x9
inet 192.168.0.19 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:04:76:97:97:57
media: Ethernet none
status: active
Hастроил etherchannel на catalyst-2950 (ессно на уровне что-куда-воткнуто все
правильно).
Так как подозреваю, что FreeBSD pagp Hе поймет, то настроил port-channel как on.
show etherchannel detail
Channel-group listing:
-----------------------
Group: 1
----------
Group state = L2
Ports: 3 Maxports = 8
Port-channels: 1 Max Port-channels = 1
Ports in the group:
-------------------
Port: Fa0/3
------------
Port state = Up Mstr In-Bndl
Channel group = 1 Mode = On/FEC Gcchange = 0
Port-channel = Po1 GC = 0x00010001 Pseudo port-channel = Po1
Port index = 0 Load = 0x00
Age of the port in the current state: 00d:00h:29m:27s
Port: Fa0/5
------------
Port state = Up Mstr In-Bndl
Channel group = 1 Mode = On/FEC Gcchange = 0
Port-channel = Po1 GC = 0x00010001 Pseudo port-channel = Po1
Port index = 0 Load = 0x00
Age of the port in the current state: 00d:00h:29m:30s
Port: Fa0/6
------------
Port state = Up Mstr In-Bndl
Channel group = 1 Mode = On/FEC Gcchange = 0
Port-channel = Po1 GC = 0x00010001 Pseudo port-channel = Po1
Port index = 0 Load = 0x00
Age of the port in the current state: 00d:00h:29m:29s
Port-channels in the group:
----------------------
Port-channel: Po1
------------
Age of the Port-channel = 00d:00h:44m:04s
Logical slot/port = 1/0 Number of ports = 3
GC = 0x00010001 HotStandBy port = null
Port state = Port-channel Ag-Inuse
Ports in the Port-channel:
Index Load Port EC state
------+------+------+------------
0 00 Fa0/3 on
0 00 Fa0/5 on
0 00 Fa0/6 on
Time since last port bundled: 00d:00h:29m:27s Fa0/3
Time since last port Un-bundled: 00d:00h:29m:31s Fa0/6
Hа этом остаюсь искренне Ваш, Евгений.
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
