|
ru.unix.bsd
- RU.UNIX.BSD ------------------------------------------------------------------
From : Vladislav S. Miroshnichenko 2:5020/400 18 Nov 2002 19:26:13
To : All
Subject : shutdown -p
--------------------------------------------------------------------------------
Привет, народ!
Hе выключается питание, хоть ты тресни! :)
Читал конфу, пробовал- один фиг.
мамка- intel L440GX
В биосе не нашел ничего, чтобы относилось к запрету выключения питания.
В ядре есть:
device apm0
device smbus
device intpm
device smb
Так же пробовал следующие варианты для apm:
device apm0 at nexus?
device apm0 at nexus flags 0x20
В /dev:
crw-rw-r-- root operator /dev/apm
crw-rw---- root operator /dev/apmctl
В rc.conf apm_enable="YES"
Командочка apm (и apm -e enable тоже) выдает:
apm: can't open /dev/apm: Device not configured
Есть идеи?
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #9: Mon Nov 18 18:04:33 MSK 2002
root@intserv0:/usr/src/sys/compile/INTSERV
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (596.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 301924352 (294848K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> q
avail memory = 289374208 (282592K bytes)
Preloaded elf kernel "kernel" at 0xc03e2000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03e209c.
Pentium Pro MTRR support enabled
Using $PIR table, 12 entries at 0xc00fdf00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1
pci2: <PCI bus> on pcib3
xl0: <3Com 3c980C Fast Etherlink XL> port 0x1080-0x10ff mem
0xf4104000-0xf410407f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:01:02:cc:a2:ca
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x1400-0x14ff mem
0xf4100000-0xf4100fff irq 5 at device 12.0 on pci0
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x1800-0x18ff mem
0xf4101000-0xf4101fff irq 5 at device 12.1 on pci0
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1c00-0x1c3f mem
0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 11 at device 14.0 on pci0
fxp0: Ethernet address 00:a0:c9:fc:27:63
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 18.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 11
at device 18.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x1040-0x104f irq 9
at device 18.3 on pci0
intpm0: I/O mapped 1040
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped c00
pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci3: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff,0xcd800-0xcdfff
on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to deny, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
With best regards, Vladislav S. Miroshnichenko. E-mail: simm@pack.ru
--- ifmail v.2.15dev5
* Origin: Combellga (2:5020/400)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
| Тема: |
Автор: |
Дата: |
|
shutdown -p |
Vladislav S. Miroshnichenko |
18 Nov 2002 19:26:13 |
 shutdown -p |
Wadim Shkirmantov |
18 Nov 2002 22:38:16 |
 shutdown -p |
Max Khon |
19 Nov 2002 01:55:56 |
|
|
