|
ru.unix.bsd
- RU.UNIX.BSD ------------------------------------------------------------------
From : Eugene Grosbein 2:5006/1 06 Apr 2005 21:19:53
To : All
Subject : AIC7899
--------------------------------------------------------------------------------
Привет!
Долгое время нормально работала система с onboard Adaptec SCSI AIC7899
controller с двумя дисками:
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST336607LW 0007> Fixed Direct Access SCSI-3 device
Добавляю еще один диск со SCSI ID 2, при старте SCSI BIOS
его видит, но напротив старых дисков пишет 160 (я так понимаю,
это скорость обмена по шине), а против нового почему-то 40.
Ядро при детекте дисков пишет (cut-n-paste из dmesg):
Waiting 15 seconds for SCSI devices to settle
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe2:ahc0:0:2:1): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:2): parity error detected in Data-in phase. SEQADDR(0x6b)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x6b)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:3): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:4): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x6b)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:5): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:6): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x6e)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x71)
SCSIR
ATE(0xc2)
CRC Value Mismatch
(probe0:ahc0:0:2:7): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6a)
SCSIRATE
(0xc2)
CRC Value Mismatch
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enable
d
da0(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIR
ATE(0xc2)
CRC Value Mismatch
: 17510MB (35861388 512 byte sectors: 255H 63S/T 2232C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST336607LW 0007> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enable
d
da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0s1a
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6a)
SCSIRATE
(0xc2)
CRC Value Mismatch
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIRATE
(0xc2)
CRC Value Mismatch
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6b)
SCSIRATE
(0xc2)
CRC Value Mismatch
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIRATE
(0xc2)
CRC Value Mismatch
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6a)
SCSIRATE
(0xc2)
CRC Value Mismatch
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIRATE
(0xc2)
CRC Value Mismatch
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6b)
SCSIRATE
(0xc2)
CRC Value Mismatch
(da2:ahc0:0:2:0): parity error detected in Data-in phase. SEQADDR(0x6d)
SCSIRATE
(0xc2)
CRC Value Mismatch
(da2:ahc0:0:2:0): got CAM status 0x50
(da2:ahc0:0:2:0): fatal error, failed to attach to device
(da2:ahc0:0:2:0): lost device
(da2:ahc0:0:2:0): removing device entry
Что я делаю не так? В SCSI BIOS даже verify media проходит нормально.
FreeBSd 4.8-STABLE, pre-PAE.
Eugene
--- slrn/0.9.8.0 (FreeBSD)
* Origin: Svyaz Service JSC (2:5006/1@fidonet)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
| Тема: |
Автор: |
Дата: |
|
AIC7899 |
Eugene Grosbein |
06 Apr 2005 21:19:53 |
 AIC7899 |
Slawa Olhovchenkov |
07 Apr 2005 18:27:50 |
 Re: AIC7899 |
Eugene Grosbein |
07 Apr 2005 22:43:37 |
 AIC7899 |
Slawa Olhovchenkov |
07 Apr 2005 20:22:26 |
 Re: AIC7899 |
Eugene Grosbein |
08 Apr 2005 09:33:59 |
|
AIC7899 |
Slawa Olhovchenkov |
08 Apr 2005 10:25:36 |
|
Re: AIC7899 |
Eugene Grosbein |
08 Apr 2005 14:03:00 |
|
AIC7899 |
Slawa Olhovchenkov |
08 Apr 2005 11:13:08 |
|
Re: AIC7899 |
Eugene Grosbein |
08 Apr 2005 14:53:04 |
|
Re: AIC7899 |
Eugene Grosbein |
08 Apr 2005 18:48:45 |
|
AIC7899 |
Sergey Korolew |
08 Apr 2005 12:58:05 |
|
AIC7899 |
Sergey Korolew |
08 Apr 2005 14:04:03 |
|
|
