ru.unix.bsd

 
 - RU.UNIX.BSD ------------------------------------------------------------------
 From : Pavel Shirshov                       2:5010/148.22  04 Jul 2003  00:17:47
 To : All
 Subject : picobsd notebook etherlink III
 -------------------------------------------------------------------------------- 
 

 
   Пытаюсь на основе picobsd сделать загрузочную дискету для ноутбука.
   Все бы хорошо, только сетевка PCMCIA не находится.
   3Com 3C562D 3C563D, это что м модемом
   Etherlink 3
 
   Почитал fm увидел следующее
 
   ---------------------------
 4.3.2. FreeBSD claims to support the 3Com PCMCIA card, but my card isn't
 recognized when it's plugged into my laptop.
 
 There are a couple of possible problems. First of all, FreeBSD does not support 
 multi-function cards, so if you have a combo Ethernet/modem card (such as the
 3C562), it won't work. The default driver for the 3C589 card was written just
 like all of the other drivers in FreeBSD, and depend on the card's own
 configuration data stored in NVRAM to work. You must correctly configure
 FreeBSD's driver to match the IRQ, port, and IOMEM stored in NVRAM.
 
 Unfortunately, the only program capable of reading them is the 3COM supplied DOS
 program. This program must be run on a absolutely clean system (no other drivers
 must be running), and the program will whine about CARD-Services not being
 found, but it will continue. This is necessary to read the NVRAM values. You
 want to know the IRQ, port, and IOMEM values (the latter is called the CIS tuple
 by 3COM). The first two can be set in the program, the third is un-settable, and
 can only be read. Once you have these values, set them in UserConfig and your
 card will be recognized.
 --------------------------------
 
 Ок. Скачал 3c562n.exe c 3com.com, Посмотрел. Выдает параметры
 port 300
 IRQ 3
 А про iomem нислова!
 
 А в Windows на эту сетевку говорит про irq 3 port 110. Мда.
 есоответствие какое то.
 
 Ок
 Вставил в config ядра строки
 device ep0 at isa? irq 3 port 0x200
 
 А он мне при загрузке в ответ
 ep0: eeprom failed to come ready
 
 То есть надо указать параметр так
 device ep0 at isa? irq 3 port 0x200 iomem ????? какой?
 И где же посмотреть iomem
                 C уважением, Pavel Shirshov.
 --- GoldED+/W32 1.1.5-030609
  * Origin: @ORIGIN.TXT.TXT.TXT.TXT (2:5010/148.22)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор