ru.unix.bsd

 
 - RU.UNIX.BSD ------------------------------------------------------------------
 From : Lev Serebryakov                      2:5030/661     24 Feb 2002  02:54:19
 To : All
 Subject : XFree86-4.1.0, G400/32Mb, native drivers
 -------------------------------------------------------------------------------- 
 

 
   У кого-нибудь работает G400 с фирменным Matrox'овским драйвером? Собрал тут
 под 4.4-STABLE, пускаю X, они показывают экран с мусором и курсором :)
   Отрисовать ничего нормально не могут, DRI запрещают, и вообще себя ведут
 крайне нехорошо.
   И сообщают про AGP 1x :(
   Кто-нибуль такое борол?
   Вот сообщения про карточку от X'ов и мой конфиг:
 
 > X output (filtered)
 
 (--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 3, Mem @ 0xd0000000/25, 0xd2000000/14,
 0xd3000000/23
 
 >> skipped
 
 (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
 (II) Module mga: vendor="The XFree86 Project"
     compiled for 4.1.0, module version = 1.1.0
 
 >>skipped
 
 (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
     mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
     mgag550
 
 >>skipped
 
 (**) MGA(0): Depth 24, (--) framebuffer bpp 32
 (==) MGA(0): RGB weight 888
 (II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o
 (II) Module mga_hal: vendor="The XFree86 Project"
     compiled for 4.1.0, module version = 1.0.0
 (II) MGA(0): Matrox HAL module used
 (--) MGA(0): Chipset: "mgag400"
 (==) MGA(0): Using AGP 1x mode
 (**) MGA(0): PseudoColor overlay enabled
 (--) MGA(0): Linear framebuffer at 0xD0000000
 (--) MGA(0): MMIO registers at 0xD2000000
 (--) MGA(0): Pseudo-DMA transfer window at 0xD3000000
 (==) MGA(0): BIOS at 0xC0000
 (--) MGA(0): Video BIOS info block at offset 0x07B20
 (WW) MGA(0): Video BIOS info block not detected!
 (**) MGA(0): VideoRAM: 32768 kByte
 
 >>skipped
 
 (==) MGA(0): Write-combining range (0xd2000000,0x4000) was already clear
 (==) MGA(0): Write-combining range (0xd0000000,0x2000000)
 (==) MGA(0): Write-combining range (0xd3000000,0x800000) was already clear
 (==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear
 (II) MGA(0): I2C bus "DDC" initialized.
 (II) MGA(0): I2C device "DDC:ddc2" registered.
 (II) MGA(0): I2C device "DDC:ddc2" removed.
 (II) MGA(0): I2C Monitor info: 0x0
 (II) MGA(0): end of I2C Monitor info
 
 (--) MGA(0): No DDC signal
 (II) MGA(0): DDC Monitor info: 0x0
 (II) MGA(0): end of DDC Monitor info
 
 (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
 (==) MGA(0): Min pixel clock is 12 MHz
 (==) MGA(0): Max pixel clock is 300 MHz
 (II) MGA(0): CTX PR705F: Using hsync range of 30.00-85.00 kHz
 (II) MGA(0): CTX PR705F: Using vrefresh range of 50.00-160.00 Hz
 (II) MGA(0): Clock range:  12.00 to 300.00 MHz
 
 >>skipped about bad modes
 
 (==) MGA(0): Write-combining range (0xd2000000,0x4000) was already clear
 (==) MGA(0): Write-combining range (0xd0000000,0x2000000)
 (==) MGA(0): Write-combining range (0xd3000000,0x800000) was already clear
 (--) MGA(0): Virtual size is 1152x864 (pitch 1152)
 (**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
 (**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
 (**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
 (==) MGA(0): DPI set to (75, 75)
 
 >>skipped some additional modules
 
 (II) Module ramdac: vendor="The XFree86 Project"
     compiled for 4.1.0, module version = 0.1.0
 
 >Symbol fbPictureInit from module /usr/X11R6/lib/modules/drivers/mga_drv.o
 >is unresolved!
 >Symbol vbeFree from module /usr/X11R6/lib/modules/drivers/mga_drv.o is
 >unresolved!
 
 (--) Depth 24 pixmap format is 32 bpp
 (==) MGA(0): Write-combining range (0xd2000000,0x4000) was already clear
 (==) MGA(0): Write-combining range (0xd0000000,0x2000000)
 (==) MGA(0): Write-combining range (0xd3000000,0x800000) was already clear
 (==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear
 (--) MGA(0): 16 DWORD fifo
 (II) MGA(0): Using 2776 lines for offscreen memory.
 (II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
     Screen to screen bit blits
     Solid filled rectangles
     Solid filled trapezoids
     8x8 mono pattern filled rectangles
     8x8 mono pattern filled trapezoids
     Indirect CPU to Screen color expansion
     Screen to Screen color expansion
     Solid Lines
     Dashed Lines
     Scanline Image Writes
     Offscreen Pixmaps
     Driver provided FillMono8x8PatternRects replacement
     Setting up tile and stipple cache:
         32 128x128 slots
         19 256x256 slots
         5 512x512 slots
 (==) MGA(0): Backing store disabled
 (==) MGA(0): Silken mouse enabled
 (II) MGA(0): Using texture video
 (==) MGA(0): Direct rendering disabled
 > XF86config (filtered)
 
 Section "Module"
     Load        "dbe"   # Double buffer extension
     Load        "extmod"
     Load        "type1"
     Load        "freetype"
     Load        "glx"
 EndSection
 Section "Device"
     Identifier  "G400"
     Driver      "mga"
     VideoRam    32768
     Option      "Overlay"
     Option      "TexturedVideo" "on"
 EndSection
 
 Section "Screen"
     Identifier  "Main Screen"
     Device      "G400"
     Monitor     "CTX PR705F"
     DefaultDepth 24
 
     Subsection "Display"
         Depth       8
         Modes       "1152x864" "1024x768" "800x600"
         ViewPort    0 0
     EndSubsection
     Subsection "Display"
         Depth       16
         Modes       "1152x864" "1024x768" "800x600"
         ViewPort    0 0
     EndSubsection
     Subsection "Display"
         Depth       24
         Modes       "1152x864" "1024x768" "800x600"
         ViewPort    0 0
     EndSubsection
     Subsection "Display"
         Depth       32
         Modes       "1152x864" "1024x768" "800x600"
         ViewPort    0 0
     EndSubsection
 EndSection
     Remember, pain is part of pleasure, All.
 ... Ползет сквозь пальцы медузья плоть некрепкого сна...
 --- I try to be as sharp as I can
  * Origin: Cave of Black Lion (2:5030/661)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор