|
ru.unix.bsd
- RU.UNIX.BSD ------------------------------------------------------------------
From : appolon@elcat2.bishkek.su 2:5020/400 08 Aug 2001 10:01:00
To : All
Subject : COM3 and COM4
--------------------------------------------------------------------------------
Всем привет !!!
Если кто сталкивался вот с такой небольшой проблемой.
ЕСть у меня на серваке (как и у всех почти) стандартно COM1 and COM2 и еще
в придачу восьмипортовка. Захотелось еще поставить дополнительные
COM3 and COM4.
Так вот описал в ядре
device at isa? port IO_COM3 irq 2
device at isa? port IO_COM4 irq 8
компилирую, перегружаюсь и получаю
sio10: configured irq 2 not in bitmap of probed irqs 0x10
sio10: irq maps: 0x41 0x51 0x41 0x41
sio10 at port 0x3e8-0x3ef irq 2 flags 0x10 on isa0
sio10: type 16450
sio11: configured irq 8 not in bitmap of probed irqs 0x8
sio11: irq maps: 0x41 0x49 0x41 0x41
sio11 at port 0x2e8-0x2ef irq 8 flags 0x10 on isa0
sio11: type 16450
Пытаюсь проконфигурировать модкмы на этих портах. Hоль. Команды вводяться
но не выполняются. Конечно порты находятся на строй портовке с 386 компа.
Кто что посоветует ?????
With best,Rinat.
P.S. Привожу навсякий случай verbose mode
==========================Cut=============================
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #25: Wed Aug 8 10:09:08 KGST 2001
root@elcat2.bishkek.su:/usr/src/sys/compile/SUPER
Calibrating clock(s) ... TSC clock: 200477619 Hz, i8254 clock: 1193320 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 200455394 Hz
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002d5000 - 0x07ff7fff, 131215360 bytes (32035 pages)
avail memory = 127934464 (124936K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fac20
bios32: Entry = 0xfb0c0 (c00fb0c0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb0f0
pnpbios: Found PnP BIOS data at 0xc00fbe50
pnpbios: Entry = f0000:be78 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Intel Pentium detected, installing workaround for F00F bug
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 176118351 bytes/sec
bzero() bandwidth = 88432967 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7100, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7110, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 00006300, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005f00, size 4
found-> vendor=0x5333, dev=0x88c0, revid=0x00
class=00-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=50
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=50
ata0-master: ATA probe a=01 b=a5
ata0-slave: ATA probe a=01 b=a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=00 status0=a5 status1=a5
ata1: probe allocation failed
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at
7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5f00-0x5f0f at device
7.3 on pci0
pci0: <S3 864 graphics accelerator> (vendor=0x5333, dev=0x88c0) at 8.0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00006000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x51 0x51
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x49 0x49
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
sio10: configured irq 2 not in bitmap of probed irqs 0x10
sio10: irq maps: 0x41 0x51 0x41 0x41
sio10 at port 0x3e8-0x3ef irq 2 flags 0x10 on isa0
sio10: type 16450
sio11: configured irq 8 not in bitmap of probed irqs 0x8
sio11: irq maps: 0x41 0x49 0x41 0x41
sio11 at port 0x2e8-0x2ef irq 8 flags 0x10 on isa0
sio11: type 16450
sio2: irq maps: 0x41 0x61 0x41 0x41
sio2 at port 0x140-0x147 irq 5 flags 0x205 on isa0
sio2: type 16550A
sio3: irq maps: 0x41 0x41 0x41 0x41
sio3 at port 0x148-0x14f flags 0x205 on isa0
sio3: type 16550A
sio4: irq maps: 0x41 0x41 0x41 0x41
sio4 at port 0x150-0x157 flags 0x205 on isa0
sio4: type 16550A
sio5: irq maps: 0x41 0x41 0x41 0x41
sio5 at port 0x158-0x15f flags 0x205 on isa0
sio5: type 16550A
sio6: irq maps: 0x41 0x41 0x41 0x41
sio6 at port 0x160-0x167 flags 0x205 on isa0
sio6: type 16550A
sio7: irq maps: 0x41 0x41 0x41 0x41
sio7 at port 0x168-0x16f flags 0x205 on isa0
sio7: type 16550A
sio8: irq maps: 0x41 0x41 0x41 0x41
sio8: probe failed test(s): 0 1 2 4 6 7 9
sio8 failed to probe at port 0x170-0x177 flags 0x205 on isa0
sio9: irq maps: 0x41 0x41 0x41 0x41
sio9 at port 0x178-0x17f flags 0x205 on isa0
sio9: type 16550A
ed0 at port 0x300-0x31f iomem 0xd8000 irq 9 on isa0
bpf: ed0 attached
ed0: address 00:40:95:1b:de:5c, type NE2000 (16 bit)
cx0 at port 0x240,0x240-0x25f irq 10 drq 7 on isa0
cx0: <Cronyx-Sigma-22c>
bpf: cx0 attached
bpf: cx1 attached
cx0: driver is using old-style compatability shims
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fe0f3f 0..1022=1023 cylinders, 0..15=16 heads, 1..63=63 sectors
1:03fe0f3f 0..1022=1023 cylinders, 0..15=16 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
device combination doesn't support shared irq8
intr_connect(irq8) failed, result=-1
bpf: lo0 attached
DUMMYNET initialized (000608)
bpf: ppp0 attached
bpf: ppp1 attached
bpf: ppp2 attached
bpf: ppp3 attached
bpf: ppp4 attached
bpf: ppp5 attached
bpf: ppp6 attached
bpf: ppp7 attached
bpf: ppp8 attached
bpf: ppp9 attached
bpf: ppp10 attached
bpf: ppp11 attached
bpf: ppp12 attached
bpf: ppp13 attached
bpf: ppp14 attached
bpf: ppp15 attached
new masks: bio 684040, tty 63113a, net 67173a
bpf: sl0 attached
bpf: sl1 attached
bpf: sl2 attached
bpf: sl3 attached
bpf: sl4 attached
bpf: sl5 attached
bpf: sl6 attached
bpf: sl7 attached
bpf: sl8 attached
bpf: sl9 attached
bpf: sl10 attached
bpf: sl11 attached
bpf: sl12 attached
bpf: sl13 attached
bpf: sl14 attached
bpf: sl15 attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled,
default to accept, logging limited to 100 packets/entry by default
ata0-master: success setting UDMA2 on PIIX4 chip
Creating DISK ad0
Creating DISK wd0
ad0: <QUANTUM FIREBALLlct20 10/APL.0900> ATA-5 disk at ata0-master
ad0: 9787MB (20044080 sectors), 19885 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 8 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ad0: 9787MB <QUANTUM FIREBALLlct20 10> [19885/16/63] at ata0-master UDMA33
ata0-slave: success setting UDMA2 on PIIX4 chip
Creating DISK ad1
Creating DISK wd1
ad1: <FUJITSU MPF3102AT/0028> ATA-5 disk at ata0-slave
ad1: 9773MB (20015856 sectors), 19857 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
ad1: 9773MB <FUJITSU MPF3102AT> [19857/16/63] at ata0-slave UDMA33
Mounting root from ufs:ad0s1a
ad0s1: type 0xa5, start 63, end = 20044079, size 20044017 : OK
start_init: trying /sbin/init
ad1s1: type 0xa5, start 63, end = 20015855, size 20015793 : OK
ad1s1: type 0xa5, start 63, end = 20015855, size 20015793 : OK
--- ifmail v.2.15dev5
* Origin: ISP ElCat. Bishkek. Kyrgyzstan. (2:5020/400)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
| Тема: |
Автор: |
Дата: |
|
COM3 and COM4 |
appolon@elcat2.bishkek.su |
08 Aug 2001 10:01:00 |
 COM3 and COM4 |
Pavel Levshin |
10 Aug 2001 23:27:50 |
|
|
