|
ru.unix.bsd
- RU.UNIX.BSD ------------------------------------------------------------------
From : Maxim V. Kostikov 2:5020/400 28 Jan 2001 20:18:08
To : All
Subject : Again: DialUp for FreeBSD 4.1.1-release :(
--------------------------------------------------------------------------------
Hell0!
Hу что, бесовщина продолжает куражиться ;)
До сего дня пользовался ppp без особых проблем. Hо мы
не ищем легких путей! Черт дернул попробовать
воспользоваться интрефейсом для pppd из KDE. Даже один
раз с его помощью позвонил и соединился с провайдером.
И вот, как и ожидал, вылезла любимая проблема (см.
предыдущие сообщения).
Из слов остались только %##$^@%$^. Прилагаю
логи и конфиг. Помогите понять суть и решить проблему.
Best regards,
Maxim ICQ #12331910
1. ppp.conf
default:
ident user-ppp VERSION (built COMPILATIONDATE)
set log Phase Chat LCP IPCP CCP tun command
set speed 115200
set device /dev/cuaa0
set ifaddr 0 0 255.255.255.0 0.0.0.0
set timeout 0
enable dns
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0
OK \\dATDP\\T TIMEOUT 40 CONNECT"
set login
set authname name
set authkey password
set phone 703403
2. ppp.log
Jan 29 15:38:18 mxm ppp[188]: Phase: Using interface: tun0
Jan 29 15:38:18 mxm ppp[188]: Phase: deflink: Created in closed state
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set speed 115200
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set device /dev/cuaa0
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set ifaddr 0 0
255.255.255.0 0.0.0.0
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set timeout 0
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: enable dns
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set dial ABORT BUSY
ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDP\T TIMEOUT 40
CONNECT
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set login
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set authname parus
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set authkey ********
Jan 29 15:38:18 mxm ppp[188]: tun0: Command: default: set phone 703403
Jan 29 15:38:18 mxm ppp[188]: tun0: Phase: PPP Started (interactive mode).
Jan 29 15:38:21 mxm ppp[188]: tun0: Command: /dev/tty: dial
Jan 29 15:38:21 mxm ppp[188]: tun0: Phase: bundle: Establish
Jan 29 15:38:21 mxm ppp[188]: tun0: Phase: deflink: closed -> opening
Jan 29 15:38:21 mxm ppp[188]: tun0: Phase: deflink: Connected!
Jan 29 15:38:21 mxm ppp[188]: tun0: Phase: deflink: opening -> dial
Jan 29 15:38:21 mxm ppp[188]: tun0: Chat: Phone: 703403
Jan 29 15:38:21 mxm ppp[188]: tun0: Chat: deflink: Dial attempt 1 of 1
Jan 29 15:38:21 mxm ppp[188]: tun0: Chat: Send: AT^M
Jan 29 15:38:21 mxm ppp[188]: tun0: Chat: Expect(5): OK
Jan 29 15:38:22 mxm ppp[188]: tun0: Chat: Received: AT^M^M
Jan 29 15:38:22 mxm ppp[188]: tun0: Chat: Received: OK^M
Jan 29 15:38:22 mxm ppp[188]: tun0: Chat: Send: ATE1Q0^M
Jan 29 15:38:22 mxm ppp[188]: tun0: Chat: Expect(5): OK
Jan 29 15:38:22 mxm ppp[188]: tun0: Chat: Received: ATE1Q0^M^M
Jan 29 15:38:22 mxm ppp[188]: tun0: Chat: Received: OK^M
Jan 29 15:38:22 mxm ppp[188]: tun0: Chat: Send: ATDP703403^M
Jan 29 15:38:24 mxm ppp[188]: tun0: Chat: Expect(40): CONNECT
Jan 29 15:38:51 mxm ppp[188]: tun0: Chat: Received: ATDP703403^M^M
Jan 29 15:38:51 mxm ppp[188]: tun0: Chat: Received: CONNECT 33600/ARQ^M
Jan 29 15:38:51 mxm ppp[188]: tun0: Phase: deflink: dial -> carrier
Jan 29 15:38:52 mxm ppp[188]: tun0: Phase: deflink: /dev/cuaa0: CD detected
Jan 29 15:38:52 mxm ppp[188]: tun0: Phase: deflink: carrier -> login
Jan 29 15:38:52 mxm ppp[188]: tun0: Phase: deflink: login -> lcp
Jan 29 15:38:52 mxm ppp[188]: tun0: LCP: FSM: Using "deflink" as a transport
Jan 29 15:38:52 mxm ppp[188]: tun0: LCP: deflink: State change Initial -->
Closed
Jan 29 15:38:52 mxm ppp[188]: tun0: LCP: deflink: State change Closed -->
Stopped
Jan 29 15:38:53 mxm ppp[188]: tun0: LCP: deflink: LayerStart
Jan 29 15:38:53 mxm ppp[188]: tun0: LCP: deflink: SendConfigReq(1) state =
Stopped
Jan 29 15:38:53 mxm ppp[188]: tun0: LCP: ACFCOMP[2]
Jan 29 15:38:53 mxm ppp[188]: tun0: LCP: PROTOCOMP[2]
Jan 29 15:38:53 mxm ppp[188]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 29 15:38:53 mxm ppp[188]: tun0: LCP: MRU[4] 1500
Jan 29 15:38:53 mxm ppp[188]: tun0: LCP: MAGICNUM[6] 0x6e0b2665
Jan 29 15:38:53 mxm ppp[188]: tun0: LCP: deflink: State change Stopped -->
Req-Sent
Jan 29 15:38:56 mxm ppp[188]: tun0: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Jan 29 15:38:56 mxm ppp[188]: tun0: LCP: ACFCOMP[2]
Jan 29 15:38:56 mxm ppp[188]: tun0: LCP: PROTOCOMP[2]
Jan 29 15:38:56 mxm ppp[188]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 29 15:38:56 mxm ppp[188]: tun0: LCP: MRU[4] 1500
Jan 29 15:38:56 mxm ppp[188]: tun0: LCP: MAGICNUM[6] 0x6e0b2665
Jan 29 15:38:59 mxm ppp[188]: tun0: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Jan 29 15:38:59 mxm ppp[188]: tun0: LCP: ACFCOMP[2]
Jan 29 15:38:59 mxm ppp[188]: tun0: LCP: PROTOCOMP[2]
Jan 29 15:38:59 mxm ppp[188]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 29 15:38:59 mxm ppp[188]: tun0: LCP: MRU[4] 1500
Jan 29 15:38:59 mxm ppp[188]: tun0: LCP: MAGICNUM[6] 0x6e0b2665
Jan 29 15:39:02 mxm ppp[188]: tun0: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Jan 29 15:39:02 mxm ppp[188]: tun0: LCP: ACFCOMP[2]
Jan 29 15:39:02 mxm ppp[188]: tun0: LCP: PROTOCOMP[2]
Jan 29 15:39:02 mxm ppp[188]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 29 15:39:02 mxm ppp[188]: tun0: LCP: MRU[4] 1500
Jan 29 15:39:02 mxm ppp[188]: tun0: LCP: MAGICNUM[6] 0x6e0b2665
Jan 29 15:39:05 mxm ppp[188]: tun0: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Jan 29 15:39:05 mxm ppp[188]: tun0: LCP: ACFCOMP[2]
Jan 29 15:39:05 mxm ppp[188]: tun0: LCP: PROTOCOMP[2]
Jan 29 15:39:05 mxm ppp[188]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 29 15:39:05 mxm ppp[188]: tun0: LCP: MRU[4] 1500
Jan 29 15:39:05 mxm ppp[188]: tun0: LCP: MAGICNUM[6] 0x6e0b2665
Jan 29 15:39:08 mxm ppp[188]: tun0: LCP: deflink: LayerFinish
Jan 29 15:39:08 mxm ppp[188]: tun0: LCP: deflink: State change Req-Sent -->
Stopped
Jan 29 15:39:08 mxm ppp[188]: tun0: LCP: deflink: State change Stopped -->
Closed
Jan 29 15:39:08 mxm ppp[188]: tun0: LCP: deflink: State change Closed -->
Initial
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: deflink: Disconnected!
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: deflink: lcp -> logout
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: deflink: logout -> hangup
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: deflink: Disconnected!
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: deflink: Connect time: 47 secs:
338 octets in, 265 octets out
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: deflink: : 17 packets in, 5
packets out
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: total 12 bytes/sec, peak 69
bytes/sec on Mon Jan 29 15:39:08 2001
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: deflink: hangup -> closed
Jan 29 15:39:08 mxm ppp[188]: tun0: Phase: bundle: Dead
Jan 29 15:39:12 mxm ppp[188]: tun0: Command: /dev/tty: quit
Jan 29 15:39:12 mxm ppp[188]: tun0: Phase: PPP Terminated (normal).
--- ifmail v.2.15dev5
* Origin: Cityline Kaliningrad news server (2:5020/400)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
