|
ru.networks
- RU.NETWORKS ------------------------------------------------------------------
From : Sergei Shumakov 2:5005/47 13 Jul 2001 23:09:35
To : Yuri PQ
Subject : 3COM RAS 1500
--------------------------------------------------------------------------------
Wednesday July 04 2001 10:44, Yuri PQ wrote to Mark Gorovenko:
YP> хитрость в том, что в режиме PPP я не могу сменить скорость. 56К - и
YP> никак иначе. а в режиме FR - могу сделать от 9600 до 2М... и модемы -
YP> такие же стоят между 2мя cisco и свои 2М дают.
если верить доке, то 2M можно получить, если будет соотв клок.
=== Cut ===
SolutionID: 2.0.24757487.2543931
Title: SuperStack II Remote Access Server 1500 - How to configure Point to Point
PPP connections over the WAN port
Goal How to configure PPP connections over the WAN Port
Fact SuperStack II Remote Access System 1500
Fact WAN
Fact Point to Point Protocol
Fact PPP
Fact CSU/DSU
Fact Firmware Release 2.0.x
Symptom Cannot ping across the WAN link
Symptom Cannot establish PPP connections over the WAN Port with firmware
releases below 2.0.x
Fix The Superstack II RAS1500 now supports leased line point to point
connections over the WAN port with release 2.0.x. This port uses PPP and can
connect to another RAS1500, or any other device that supports PPP over a leased
line.
There is only one command that distinguishes the WAN connection from standard
ISDN or Analog port connections which is:
add datalink ppp user <username> interface rm0/wan:1
>Below is an example of a configuration that configures an unnumbered
>routing connection. The customer needs to provide a CSU/DSU appropriate
>to the interface selected. Clocking can only be provided by the network
>or CSU/DSU, not the RAS1500. The RAS1500 supports clocking speeds on the
>WAN port up to 2.048 Mb/s.
add ip network ip address <Ethernet address> frame ethernet
add ipx network ipx address <IPX network number> frame dsap
add user <username> network ppp type dial_out,network
set network user <username> bridging disable
set network user <username> ip enable ip_routing both
set network user <username> remote_ip_address <Remote IP address>/<Subnet Mask>
set network user <username> ipx enable ipx_address <Remote IPX Address>
ipx_routing all ipx_wan enable
set network user <username> rip <ripv1 or ripv2>
add datalink ppp user <username> interface rm0/wan:1
save all
Example:
add ip network ip address 192.168.1.1 frame ethernet
add ipx network ipx address cdef frame dsap
add user test network ppp type dial_out,network
set network user test bridging disable
set network user test ip enable ip_routing both
set network user test remote_ip_address 192.128.190.15/c
set network user test ipx enable ipx_address 100 ipx_routing all ipx_wan enable
set network user test rip ripv2
add datalink ppp user test interface rm0/wan:1
save all
Fact Search group - SuperStack II Remote Access
Fact Last Reviewed: July 2001
Fact Search group - SuperStack 3 Remote Access
=== Cut ===
P.S. как тебе последний fact? я слышал что они собираются выпустить SS3 RAS, но
подробных данных так нигде и не встречал.
Sergei e-mail: sergei.shumakov@altavista.net
ICQ: 14192519
--- GoldED+/W32 snapshot-2000.12.24
* Origin: Visual Systems. Tomsk. Russia. (2:5005/47)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
