|
ru.networks
- RU.NETWORKS ------------------------------------------------------------------
From : Eugene Karachevsky 2:467/62 13 Jun 2001 23:44:44
To : Mike Roschin
Subject : тонкая настройка NetBIOS, NetBEUI или TCPBEUI
--------------------------------------------------------------------------------
[skiped]
MR> Интересует возможности настройки в винде или пополаме тонкостей
MR> работы нетбиоса или нетбиоса_на_тсп/ип. Hапример таких деталей, как
MR> время ожидания ACK`ов, пауза между перепосылками блока данных,
MR> макс.размер пересылаемого блока данных и тому подобные вещи. Где
MR> посмотреть?
Дык в хелпе родном пополамном.. :)
Вот кусочек для примера:
-- cut --
Inactivity Timer - Ti (ti)
This parameter specifies the inactivity timer value, in milliseconds.
The inactivity timer determines how often the IBM OS/2 NetBIOS protocol driver
checks an inactive link to verify that the link is still operational. This
parameter value should usually be set to 30000 to minimize unnecessary link
checks.
Refer to the Response timer - T1 parameter for more information about
relationships between the timer parameters Response timer - T1, Acknowledgment
timer - T2, and Inactivity timer - Ti.
Default value 30000
Range 1000-65535
Local or global Global
Response Timer - T1 (t1)
This parameter specifies the transmission timer value, in
milliseconds, for NetBIOS links. The transmission timer determines the delay
before transmitting a link-level frame again if no acknowledgment is received.
The three timer parameters must have the following relationship:
T2 <= T1 <= Ti
The Response timer - T1 parameter value should be approximately two
to five times larger than the Acknowledgment timer - T2 parameter value.
Default value 1000
Range 50-65535
Local or global Global
Acknowledgment Timer - T2 (t2)
This parameter specifies the delayed acknowledgment timer value in
milliseconds. The delayed acknowledgment timer determines the length of the
delay before acknowledging a received frame, when the number of frames sent is
less than the Maximum receives outstanding parameter value.
-- cut --
-- cut --
Query Timeout (netbiostimeout)
This parameter specifies the time, in milliseconds, that the IBM OS/2
NetBIOS protocol driver waits between transmission attempts. Refer to the
NetBIOS retries parameter for more information.
Default value 500
Range 500-10000
Local or global Global
-- cut --
\dev\taxman
--- FleetStreet 1.27
* Origin: Taxcraft. [100% Microsoft free] (2:467/62)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
