|
ru.linux
- RU.LINUX ---------------------------------------------------------------------
From : Andrey Ovchinnikov 2:467/70.49 23 Feb 2005 00:03:47
To : Igor Tihonov
Subject : Re: NForce2 USB и внешний HDD
--------------------------------------------------------------------------------
IT> Системный таймер отметил Sat, 19 Feb 05 19:02:43 +0300 когда Andrey
IT> Ovchinnikov писал: есть подозрения что дрова не те. вообщем не тот
IT> USB модуль грузиш
Feb 22 11:17:12 home usb.c: registered new driver usbdevfs
Feb 22 11:17:12 home usb.c: registered new driver hub
Feb 22 11:17:12 home PCI: Setting latency timer of device 00:02.2 to 64
Feb 22 11:17:12 home ehci_hcd 00:02.2: nVidia Corporation nForce2 USB Controller
Feb 22 11:17:12 home ehci_hcd 00:02.2: irq 20, pci mem f880c000
Feb 22 11:17:12 home usb.c: new USB bus registered, assigned bus number 1
Feb 22 11:17:12 home ehci_hcd 00:02.2: ehci_start hcs_params 0x102486 dbg=1 cc=2
pcc=4 !ppc ports=6
Feb 22 11:17:12 home ehci_hcd 00:02.2: ehci_start portroute 0 0 1 1 1 0
Feb 22 11:17:12 home ehci_hcd 00:02.2: ehci_start hcc_params a082 caching frame
256/512/1024
Feb 22 11:17:12 home ehci_hcd 00:02.2: capability 0001 at a0
Feb 22 11:17:12 home ehci_hcd 00:02.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
Feb 22 11:17:12 home PCI: cache line size of 64 is not supported by device
00:02.2
Feb 22 11:17:12 home ehci_hcd 00:02.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
Feb 22 11:17:12 home ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver
2003-Dec-29/2.4
Feb 22 11:17:12 home hcd.c: 00:02.2 root hub device address 1
Feb 22 11:17:12 home usb.c: kmalloc IF f7d9c2c0, numif 1
Feb 22 11:17:12 home usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
Feb 22 11:17:12 home usb.c: USB device number 1 default language ID 0x0
Feb 22 11:17:12 home Manufacturer: Linux 2.4.29 ehci_hcd
Feb 22 11:17:12 home Product: nVidia Corporation nForce2 USB Controller
Feb 22 11:17:12 home SerialNumber: 00:02.2
Feb 22 11:17:12 home hub.c: USB hub found
Feb 22 11:17:12 home hub.c: 6 ports detected
Feb 22 11:17:12 home hub.c: standalone hub
Feb 22 11:17:12 home hub.c: ganged power switching
Feb 22 11:17:12 home hub.c: individual port over-current protection
Feb 22 11:17:12 home hub.c: Single TT
Feb 22 11:17:12 home hub.c: TT requires at most 8 FS bit times
Feb 22 11:17:12 home hub.c: Port indicators are not supported
Feb 22 11:17:12 home hub.c: power on to power good time: 20ms
Feb 22 11:17:12 home hub.c: hub controller current requirement: 0mA
Feb 22 11:17:12 home hub.c: port removable status: RRRRRR
Feb 22 11:17:12 home hub.c: local power source is good
Feb 22 11:17:12 home hub.c: no over-current condition exists
Feb 22 11:17:12 home hub.c: enabling power on all ports
Feb 22 11:17:12 home usb.c: hub driver claimed interface f7d9c2c0
Feb 22 11:17:12 home usb.c: kusbd: /sbin/hotplug add 1
Feb 22 11:17:12 home usb.c: kusbd policy returned 0xfffffffe
Feb 22 11:17:12 home PCI: Setting latency timer of device 00:02.0 to 64
Feb 22 11:17:12 home host/usb-ohci.c: USB OHCI at membase 0xf880e000, IRQ 22
Feb 22 11:17:12 home host/usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2
USB Controller
Feb 22 11:17:12 home usb.c: new USB bus registered, assigned bus number 2
Feb 22 11:17:12 home usb.c: kmalloc IF f7d9c540, numif 1
Feb 22 11:17:12 home usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
Feb 22 11:17:12 home usb.c: USB device number 1 default language ID 0x0
Feb 22 11:17:12 home Product: USB OHCI Root Hub
Feb 22 11:17:12 home SerialNumber: f880e000
Feb 22 11:17:12 home hub.c: USB hub found
Feb 22 11:17:12 home hub.c: 3 ports detected
Feb 22 11:17:12 home hub.c: standalone hub
Feb 22 11:17:12 home hub.c: ganged power switching
Feb 22 11:17:12 home hub.c: global over-current protection
Feb 22 11:17:12 home hub.c: Port indicators are not supported
Feb 22 11:17:12 home hub.c: power on to power good time: 2ms
Feb 22 11:17:12 home hub.c: hub controller current requirement: 0mA
Feb 22 11:17:12 home hub.c: port removable status: RRR
Feb 22 11:17:12 home hub.c: local power source is good
Feb 22 11:17:12 home hub.c: no over-current condition exists
Feb 22 11:17:12 home hub.c: enabling power on all ports
Feb 22 11:17:12 home usb.c: hub driver claimed interface f7d9c540
Feb 22 11:17:12 home usb.c: kusbd: /sbin/hotplug add 1
Feb 22 11:17:12 home usb.c: kusbd policy returned 0xfffffffe
Feb 22 11:17:12 home PCI: Setting latency timer of device 00:02.1 to 64
Feb 22 11:17:12 home host/usb-ohci.c: USB OHCI at membase 0xf8810000, IRQ 21
Feb 22 11:17:12 home host/usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2
USB Controller (#2)
Feb 22 11:17:12 home usb.c: new USB bus registered, assigned bus number 3
Feb 22 11:17:12 home usb.c: kmalloc IF f7d9c7c0, numif 1
Feb 22 11:17:12 home usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
Feb 22 11:17:12 home usb.c: USB device number 1 default language ID 0x0
Feb 22 11:17:12 home Product: USB OHCI Root Hub
Feb 22 11:17:12 home SerialNumber: f8810000
Feb 22 11:17:12 home hub.c: USB hub found
Feb 22 11:17:12 home hub.c: 3 ports detected
Feb 22 11:17:12 home hub.c: standalone hub
Feb 22 11:17:12 home hub.c: ganged power switching
Feb 22 11:17:12 home hub.c: global over-current protection
Feb 22 11:17:12 home hub.c: Port indicators are not supported
Feb 22 11:17:12 home hub.c: power on to power good time: 2ms
Feb 22 11:17:12 home hub.c: hub controller current requirement: 0mA
Feb 22 11:17:12 home hub.c: port removable status: RRR
Feb 22 11:17:12 home hub.c: local power source is good
Feb 22 11:17:12 home hub.c: no over-current condition exists
Feb 22 11:17:12 home hub.c: enabling power on all ports
Feb 22 11:17:12 home usb.c: hub driver claimed interface f7d9c7c0
Feb 22 11:17:12 home usb.c: kusbd: /sbin/hotplug add 1
Feb 22 11:17:12 home usb.c: kusbd policy returned 0xfffffffe
Feb 22 11:17:12 home usb.c: registered new driver usblp
Feb 22 11:17:12 home printer.c: v0.13: USB Printer Device Class driver
Feb 22 11:17:12 home Initializing USB Mass Storage driver...
Feb 22 11:17:12 home usb.c: registered new driver usb-storage
Feb 22 11:17:12 home USB Mass Storage support registered.
IT> есть подозрение что винты хотят USB2, а пользуемой тобой драйвер
IT> этого не умеет... кста, попробуй полклбючать винты в другие USB
IT> разъёмы...
Все разьемы перепробовал. А винты прекрасно работают и с USB 1.1 на
моем старом iPII-350. Только _очень_ медленно.
--
powered by Saicat Linux 2:467/70.49
--- tin/1.5.16-20030125 ("Bubbles") (UNIX) (Linux/2.4.29 (i686))
* Origin: //Born to run Unix... (2:467/70.49)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
