|
ru.linux
- RU.LINUX ---------------------------------------------------------------------
From : Alexander Kolosov 2:5038/13.47 07 Nov 2004 01:14:37
To : Yoric Kotchukov
Subject : Re: проапгрейдился и что?...
--------------------------------------------------------------------------------
AK>> Собственно вопрос. Просто скажите мне, так и должно быть или можно
AK>> где-то покрутить? Перекомпилировать все с -mcpu=athlon-xp не
YK> А что пишет 'hdparm -viI /dev/hdxx'?
Много чего. Hо мне кажется, что все нормально :)
/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 117231408, start = 0
Model=ST360021A, FwRev=3.19, SerialNo=3HR1YJEN
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=117231408
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
ATA device, with non-removable media
Model Number: ST360021A
Serial Number: 3HR1YJEN
Firmware Revision: 3.19
Standards:
Supported: 5 4 3 2
Likely used: 6
Configuration:
Logical max current
cylinders 16383 4047
heads 16 16
sectors/track 63 255
--
CHS current addressable sectors: 16511760
LBA user addressable sectors: 117231408
device size with M = 1024*1024: 57241 MBytes
device size with M = 1000*1000: 60022 MBytes (60 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
Device Configuration Overlay feature set
* Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 1
Checksum: correct
--
Alexander Kolosov
--- Gnus/5.1006 (Gnus v5.10.6) Emacs/21.3 (gnu/linux)
* Origin: //Unix or dead... (2:5038/13.47)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
