|
ru.linux
- RU.LINUX ---------------------------------------------------------------------
From : Ivan Vanin 2:5030/9.49 10 Jan 2001 19:55:02
To : Alexey Dubovsky
Subject : Проблема с Intel EtherExpress 100/VE
--------------------------------------------------------------------------------
10 Jan 01 15:32, You wrote to Alexander Temerev:
AD> Правильный ответ: медленно и печатльно бредешь на
AD> http://cesdis.qfsc.nasa.gov/linux/drivers/eepro100.html,
Проснитесь, уважаемый! Интел уже приличное время, как написала
драйвера для части своих сетевых карт под Линукс, плюс софт для
всяких экзотических режимов работы, и распространяет их в виде
исходных текстов. Поддерживаются следующие карты:
Name (board numbers)
Intel(R) PRO/100+ Server Adapter (729757-xxx)
Intel(R) PRO/100+ PCI Adapter (668081-xxx, 689661-xxx)
Intel(R) PRO/100+ Management Adapter (691334-xxx, 701738-xxx, 721383-xxx)
Intel(R) PRO/100 S Management Adapter (748566-xxx, 748564-xxx)
Intel(R) PRO/100 S Advanced Management Adapter (747842-xxx, 745171-xxx)
Intel(R) PRO/100+ Dual Port Server Adapter (714303-xxx, 711269-xxx,
A28276-xxx)
Intel(R) PRO/100+ PCI Server Adapter (710550-xxx)
Intel(R) PRO/100 S Server Adapter (748568-xxx, 748565-xxx)
Intel(R) PRO/100 VE Desktop Adapter (A10386-xxx, A10725-xxx, A23801-xxx)
Intel(R) PRO/100 VM Desktop Adapter (A14323-xxx, A19725-xxx, A23801-xxx,
A22220-xxx, A23796-xxx)
Intel(R) PRO/100 S Desktop Adapter (748592-xxx, A12167-xxx, A12318-xxx,
A12317-xxx, A12165-xxx, 751767-xxx)
Intel(R) PRO/100 S Server Adapter (A10563-xxx, A12171-xxx, A12321-xxx,
A12320-xxx, A12170-xxx, 752438-xxx)
Дополнительные сервисы (ADVANCED NETWORKING SERVICES (ANS)):
* AFT (Adapter Fault Tolerance). Default mode. A secondary adapter
in the team will automatically take over on any failure of the
primary connection (cable, adapter or port). Only one card is
active at a time. After a failover, if the connection to the
primary adapter is restored, control passes automatically back to
that primary adapter. May use a mixed speed team. May use a hub or
any switch.
* ALB (Adaptive Load Balancing or asymmetrical link aggregation). A
team of 2-8 adapters share the transmission load while the primary
receives and transmits. Includes fault tolerance. Must be a same
speed team. May use any switch.
* Link Aggregation (Cisco*'s Fast EtherChannel* Technology (FEC) or
Intel Link Aggregation). A team of 2-8 10/100 adapters which
simultaneously receive and transmit. Includes fault tolerance and
load balancing. Must be a same-speed team. Requires a switch that
supports Intel Link Aggregation or Cisco's FEC. Spanning Tree
Protocol must be turned off. Must match switch aggregation
requirements.
* GEC (Gigabit equivalent of FEC). Requires GEC compatible switch
and PRO/1000 Adapters.
Roles - For AFT and ALB, you may specify which adapters in a team you
want to use as the Primary and Secondary adapters. The Primary will be
the main adapter to be used in a team. For fault tolerance, the
Primary is the only adapter used until a failure. For ALB, the Primary
is the adapter that both transmits and receives. The Secondary is the
preferred adapter (in a team consisting of more than two adapters) to
fill the role of Primary adapter if it fails.
If Priority is not specified, the adapter with the highest supported
speed will be chosen. If all adapters support the same speed, the last
one added will be the primary.
These Advanced Networking Services only work with Intel(R) adapters
and each team requires at least one Server adapter. Linux is not
supported on the PRO/100 Intelligent Server Adapter.
Ivan
--- GoldEd 3.0.1
* Origin: тот предсказуемый мирок (2:5030/9.49)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
