ru.linux

 
 - RU.LINUX ---------------------------------------------------------------------
 From : Sergey Belov                         2:5085/1.158   26 Jan 2002  00:34:28
 To : All
 Subject : xfs
 -------------------------------------------------------------------------------- 
 

 
 XFree86 Version 3.3.6a / X Window System
 (protocol Version 11, revision 0, vendor release 6300)
 Release Date: February 17 2001
         If the server is older than 6-12 months, or if your card is newer
         than the above date, look for a newer version before reporting
         problems.  (see http://www.XFree86.Org/FAQ)
 Operating System: Linux 2.2.17-8smp i686 [ELF]
 Configured drivers:
   S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
       newmmio, mmio_928, s3_generic
 (using VT number 7)
 
 XF86Config: /usr/X11R6/lib/X11/XF86Config
 (**) stands for supplied, (--) stands for probed/default values
 (**) XKB: model: "microsoft"
 (**) XKB: rules: "xfree86"
 (**) XKB: model: "pc105"
 (**) XKB: layout: "ru"
 (**) XKB: variant: "winkeys"
 (**) XKB: options: "grp:ctrl_shift_toggle,grp_led:scroll"
 (**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
 (**) Mouse: 3 button emulation (timeout: 50ms)
 (**) S3: Graphics device ID: "S3 Trio64 (generic)"
 (**) S3: Monitor ID: ""
 (--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
 ...
 (--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
 (**) FontPath set to "unix/:-1"
 (--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xe0000000
 (--) S3: chipset:   Trio64V+ rev. 54
 (--) S3: chipset driver: newmmio
 (**) S3: Option "power_saver"
 (--) S3: card type: PCI
 (--) S3: videoram:  1024k
 (--) S3: Ramdac type: s3_trio64
 (--) S3: Ramdac speed: 135 MHz
 (--) S3: Using Trio32/64 programmable clock (MCLK 59.957 MHz)
 (--) S3: Maximum allowed dot-clock: 95.000 MHz
 (**) S3: Mode "800x600": mode clock =  60.750
 (**) S3: Mode "640x480": mode clock =  45.800
 (**) S3: Using 16 bpp.  Color weight: 565
 (--) S3: Virtual resolution set to 800x600
 (--) S3: Local bus LAW is 0xE0000000
 (--) S3: Using a banksize of 1024k, line width of 800
 (--) S3: Using a single 54x54 area at (746,601) for expanding pixmaps
 (--) S3: Using 16 planes of 746x54 at (0,601) aligned 8 as font cache
 
 1>_FontTransSocketUNIXConnect: Can't connect: errno = 111
 2>failed to set default font path 'unix/:-1'
 
 Fatal server error:
 could not open default font 'fixed'
 
 When reporting a problem related to a server crash, please send
 the full server output, not just the last messages
 
 X connection to :0.0 broken (explicit kill or server shutdown).
 
 откуда грабли лезут,при переводе на работу через tcp:7100 первая ошибка ес-но
 исчезает,но вторая так и остаеться
                 C уважением, Sergey Belov.
 --- УТВЕРЖДАЮ. MSG-редактор капитан 2.5 ранга Голд Дедович
  * Origin: :) (2:5085/1.158)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор