|
ru.linux
- RU.LINUX ---------------------------------------------------------------------
From : Andy Velikoredchanin 2:5020/400 17 May 2006 23:11:25
To : All
Subject : iscsi HBA Qlogic 4010c + массив EMC Clarion AX150i
--------------------------------------------------------------------------------
Всем привет!
Сейчас пытаюсь настроить связку subj. До самого момента подключения
диска все пашет отлично. Когда все настроил и перезагружаю драйвер
qla4xxx, выдается вот что:
May 17 14:07:31 localhost kernel: QLogic iSCSI HBA Driver (e08c8000)
May 17 14:07:31 localhost kernel: ACPI: PCI interrupt 0000:00:0b.1[B] ->
GSI 10 (level, low) -> IRQ 10
May 17 14:07:31 localhost kernel: qla4xxx 0000:00:0b.1: Found an
ISP4010, irq 10, iobase 0xe0b36000
May 17 14:07:31 localhost kernel: qla4xxx 0000:00:0b.1: Configuring PCI
space...
May 17 14:07:31 localhost kernel: qla4xxx 0000:00:0b.1: Configuring
NVRAM ...
May 17 14:07:32 localhost kernel: qla4xxx 0000:00:0b.1: Initializing
firmware..
May 17 14:07:32 localhost kernel: qla4xxx 0000:00:0b.1: Waiting for
Firmware Ready..
May 17 14:07:36 localhost kernel: qla4xxx 0000:00:0b.1: Firmware Ready..
May 17 14:07:38 localhost kernel: qla4xxx 0000:00:0b.1: Initializing
DDBs ...
May 17 14:07:38 localhost kernel: qla4xxx 0000:00:0b.1: DDB[0] MB0 4000
Tot 1 Next 2 State 0000 ConnErr 00000000 0.0.0.0:3260 ""
May 17 14:07:38 localhost kernel: qla4xxx 0000:00:0b.1: DDB[0] MB0 4000
Tot 1 Next 2 State 0000 ConnErr 00000000 0.0.0.0:3260 ""
May 17 14:07:38 localhost kernel: qla4xxx 0000:00:0b.1: DDB[2] MB0 4000
Tot 1 Next 0 State 0004 ConnErr 00000000 192.168.100.3:3260
"iqn.1992-04.com.emc:ax.fcnpr061400266.b0"
May 17 14:07:38 localhost kernel: qla4xxx 0000:00:0b.1: DDB[2] MB0 4000
Tot 1 Next 0 State 0004 ConnErr 00000000 192.168.100.3:3260
"iqn.1992-04.com.emc:ax.fcnpr061400266.b0"
May 17 14:07:38 localhost kernel: qla4xxx 0000:00:0b.1: DDB list done..
May 17 14:07:38 localhost kernel: scsi-qla0-mac=00c0dd079159\;
May 17 14:07:38 localhost kernel: scsi3 : qla4xxx
May 17 14:07:38 localhost kernel: QLogic iSCSI HBA Driver version: 5.00.04
May 17 14:07:38 localhost kernel: QLogic ISP4010 @ 0000:00:0b.1 hdma-,
host#=3, fw=03.00.00.04
May 17 14:07:38 localhost kernel: Vendor: DGC Model: RAID 5
Rev: 0220
May 17 14:07:38 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 04
May 17 14:07:38 localhost kernel: qla4xxx 0000:00:0b.1: scsi(3:0:1:0):
Enabled tagged queuing, queue depth 32.
May 17 14:07:38 localhost kernel: SCSI device sda: 2516582400 512-byte
hdwr sectors (1288490 MB)
May 17 14:07:38 localhost kernel: sda: asking for cache data failed
May 17 14:07:38 localhost kernel: sda: assuming drive cache: write through
May 17 14:07:38 localhost kernel: SCSI device sda: 2516582400 512-byte
hdwr sectors (1288490 MB)
May 17 14:07:38 localhost kernel: sda: asking for cache data failed
May 17 14:07:38 localhost kernel: sda: assuming drive cache: write through
May 17 14:07:38 localhost kernel: sda:<6>Device sda not ready.
May 17 14:07:38 localhost kernel: end_request: I/O error, dev sda, sector 0
May 17 14:07:38 localhost kernel: printk: 3 messages suppressed.
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 0
May 17 14:07:38 localhost kernel: Device sda not ready.
May 17 14:07:38 localhost kernel: end_request: I/O error, dev sda, sector 0
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 0
May 17 14:07:38 localhost kernel: unable to read partition table
May 17 14:07:38 localhost kernel: Attached scsi disk sda at scsi3,
channel 0, id 1, lun 0
May 17 14:07:38 localhost scsi.agent[4692]: disk at
/devices/pci0000:00/0000:00:0b.1/host3/target3:0:1/3:0:1:0
May 17 14:07:38 localhost kernel: Device sda not ready.
May 17 14:07:38 localhost kernel: end_request: I/O error, dev sda, sector 0
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 0
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 1
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 2
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 3
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 4
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 5
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 6
May 17 14:07:38 localhost kernel: Buffer I/O error on device sda,
logical block 7
May 17 14:07:38 localhost kernel: Device sda not ready.
May 17 14:07:38 localhost kernel: end_request: I/O error, dev sda, sector 0
May 17 14:07:38 localhost kernel: Device sda not ready.
May 17 14:07:38 localhost kernel: end_request: I/O error, dev sda,
sector 512
May 17 14:07:38 localhost kernel: Device sda not ready.
May 17 14:07:38 localhost kernel: end_request: I/O error, dev sda,
sector 512
Диск sda при этом в /dev есть, но он абсолютно неработоспособный. Т.е.
нечитаемый.
Ядро 2.6.11.6. Более новое поставить не могу, т.к. под более новыми не
компилируются дрова для qlogic. Hа AX150i сконфигурирован виртуальный
диск и привязан к данному серверу. Физическое подключение прямое от
карты к массиву.
Подскажите, плиз, из-за чего такое может быть? Что-то я уже не знаю что
еще попробоавть. :(
С уважением, Андрей Великоредчанин.
--- ifmail v.2.15dev5.3
* Origin: "Medicbase news service" (2:5020/400)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
|
