ru.linux

 
 - RU.LINUX ---------------------------------------------------------------------
 From : sergey akifiev                       2:5004/53      16 Dec 2004  00:55:17
 To : All
 Subject : AverMedia 305
 -------------------------------------------------------------------------------- 
 

 0
 saa7130[0]: subsystem: 1461:2115, board: AverMedia 305 [card=35,autodetected]
 saa7130[0]: board init: gpio is 10610
 saa7130[0]: i2c eeprom 00: 61 14 15 21 ff ff ff ff ff ff ff ff ff ff ff ff
 saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 tuner: chip found at addr 0xc2 i2c-bus saa7130[0]
 tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7130[0]
 tda9885/6/7: chip found @ 0x86
 saa7130[0]: registered device video0 [v4l2]
 saa7130[0]: registered device vbi0
 saa7130[0]: registered device radio0
 
 что делать дальше? xawtv кажет какую-то чушь. mplayer - тоже. и пишет при этом
 sergey@sergey:~$ mplayer tv:// -tv driver=v4l2:normid=5:freq=49.75
 MPlayer 1.0pre5-3.3.4 (C) 2000-2004 MPlayer Team
 
 CPU: Intel Celeron 2/Pentium III Tualatin 1203 MHz (Family: 6, Stepping: 1)
 Detected cache-line size is 32 bytes
 CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
 Compiled with runtime CPU detection - WARNING - this is not optimal!
 To get best performance, recompile MPlayer with
 --disable-runtime-cpudetection.
 Reading config file /etc/mplayer/mplayer.conf
 Reading config file /home/sergey/.mplayer/config
 Reading /home/sergey/.mplayer/codecs.conf: Can't open
 '/home/sergey/.mplayer/codecs.conf': No such file or directory
 Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No
 such file or directory
 Using built-in default codecs.conf.
 font: can't open file: /home/sergey/.mplayer/font/font.desc
 Can't load font bitmap: arpi_osd_a.raw
 Linux RTC init error in ioctl (rtc_irqp_set 1024): Inappropriate ioctl for
 device
 Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
 startup scripts.
 Using usleep() timing
 Can't open input config file /home/sergey/.mplayer/input.conf: No such file or
 directory
 Can't open input config file /etc/mplayer/input.conf: No such file or
 directory
 Falling back on default (hardcoded) input config
 
 Playing tv://.
 TV detected! ;-)
 Selected driver: v4l2
  name: Video 4 Linux 2 input
  author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
  comment: first try, more to come ;-)
 Selected device: AverMedia 305
  Tuner cap: STEREO LANG1 LANG2
  Tuner rxs: MONO
  Capabilites:  video capture  video overlay  VBI capture device  tuner
 read/write  streaming
  supported norms: 0 = PAL; 1 = PAL-BG; 2 = PAL-I; 3 = PAL-DK; 4 = NTSC; 5 =
 SECAM; 6 = PAL-M; 7 = PAL-Nc;
  inputs: 0 = Television; 1 = Composite1; 2 = Composite2; 3 = S-Video;
  Current input: 0
  Current format: BGR24
 v4l2: current audio mode is : MONO
 vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
 ==========================================================================
 Opening video decoder: [raw] RAW Uncompressed Video
 VDec: vo config request - 640 x 480 (preferred csp: Planar YV12)
 VDec: using Planar YV12 as output csp (no 0)
 Movie-Aspect is undefined - no prescaling applied.
 VO: [xv] 640x480 => 640x480 Planar YV12 
 Selected video codec: [rawyv12] vfm:raw (RAW YV12)
 ==========================================================================
 Audio: no sound
 Starting playback...
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: ioctl dequeue buffer failed: Input/output error, idx = 0
 v4l2: 34 frames successfully processed, 152 frames dropped.
 
 Exiting... (Quit)
 стоит ли говорить, что под виндой тюнер работает на ура (и ТВ и
 радио)?
 чую, что следующий головняк будет с радио, а потом и с lirc'ом...
 -- 
 WBFH: -error, IL2: =SB=error
 Man on the road
 --- ifmail v.2.15.lk7.b7
  * Origin: Road police. (2:5004/53.1@fidonet)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор 

Тема:    Автор:    Дата:    AverMedia 305   sergey akifiev   16 Dec 2004 00:55:17   AverMedia 305   Vitaly Mayatskih   16 Dec 2004 02:50:44   Re: AverMedia 305   Alexandr Leykin   15 Dec 2004 22:36:53