ru.linux

 
 - RU.LINUX ---------------------------------------------------------------------
 From : Tolya Borisenkov                     2:451/13       03 Mar 2003  10:01:04
 To : All
 Subject : Re: =?KOI8-R?Q?=F3=C2=CFp=CB=C1_=D1=C4p=C1?=
 -------------------------------------------------------------------------------- 
 

 .RFC-X-Complaints-To: news@neman.grodno.by
 .RFC-NNTP-Posting-Date: Mon, 3 Mar 2003 07:01:40 +0000 (UTC)
 .RFC-User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1)
 Gecko/20021130
 .RFC-X-Accept-Language: en-us, en
 From: Tolya Borisenkov <Tolya.Borisenkov@f13.n451.z2.fidonet.org>
 
 Sergey Bestuzhev wrote:
 
 > Решил тут ядpо пеpесобpать, да вот незнаю что включить в ядpе чтобы оно
 > поддеpживало мою звуковуху, ESS 1868 ISA.
 > И как вообще ее настpоить?
 > ЗЫ
 > У меняф стоит Slackware так что sndconfig неканает.
 
 Documentation for the ESS1868F AudioDrive PnP sound card
 
 The ESS1868 sound card is a PnP ESS1688-compatible 16-bit sound card.
 
 It should be automatically detected by the Linux Kernel isapnp support 
 when you
 load the sb.o module. Otherwise you should take care of:
 
    *  The ESS1868 does not allow use of a 16-bit DMA, thus DMA 0, 1, 2, 
 and 3
       may only be used.
 
    *  isapnptools version 1.14 does work with ESS1868.  Earlier versions 
 might
       not.
 
    *  Sound support MUST be compiled as MODULES, not statically linked
       into the kernel.
 NOTE: this is only needed when not using the kernel isapnp support!
 
 For configuring the sound card's I/O addresses, IRQ and DMA, here is a
 sample copy of the isapnp.conf directives regarding the ESS1868:
 
 (CONFIGURE ESS1868/-1 (LD 1
 (IO 0 (BASE 0x0220))
 (IO 1 (BASE 0x0388))
 (IO 2 (BASE 0x0330))
 (DMA 0 (CHANNEL 1))
 (INT 0 (IRQ 5 (MODE +E)))
 (ACT Y)
 ))
 
 (for a full working isapnp.conf file, remember the
 (ISOLATE)
 (IDENTIFY *)
 at the beginning and the
 (WAITFORKEY)
 at the end.)
 
 In this setup, the main card I/O is 0x0220, FM synthesizer is 0x0388, and
 the MPU-401 MIDI port is located at 0x0330.  IRQ is IRQ 5, DMA is channel 1.
 
 After configuring the sound card via isapnp, to use the card you must load
 the sound modules with the proper I/O information.  Here is my setup:
 
 # ESS1868F AudioDrive initialization
 
 /sbin/modprobe sound
 /sbin/insmod uart401
 /sbin/insmod sb io=0x220 irq=5 dma=1 dma16=-1
 /sbin/insmod mpu401 io=0x330
 /sbin/insmod opl3 io=0x388
 /sbin/insmod v_midi
 
 opl3 is the FM synthesizer
 /sbin/insmod opl3 io=0x388
 -- 
 With profound respect, Tolya Borisenkov.
 ICQ: 93351169 2:451/13(at)fidonet.org bars(at)neman.grodno.by
 
 --- ifmail v.3.03
  * Origin: Neman GLS (2:451/13@fidonet)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор