|
|
ru.cisco- RU.CISCO --------------------------------------------------------------------- From : Irakli Natsvlishvili 2:5020/400 19 Jan 2003 04:37:14 To : All Subject : NBAR & protocol filtering --------------------------------------------------------------------------------
Hello, All!
Вот выдержка из sh pol int
FastEthernet0/1
Service-policy input: Deny
Class-map: Deny (match-any)
807 packets, 49976 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol napster
168 packets, 10362 bytes
5 minute rate 0 bps
Match: protocol custom-02
0 packets, 0 bytes
5 minute rate 0 bps
Match: protocol fasttrack
611 packets, 37896 bytes
5 minute rate 0 bps
Match: protocol gnutella
5 packets, 306 bytes
5 minute rate 0 bps
Match: protocol http url "*default.ida*"
1 packets, 60 bytes
5 minute rate 0 bps
Match: protocol http url "*cmd.exe*"
21 packets, 1292 bytes
5 minute rate 0 bps
Match: protocol http url "*root.exe*"
1 packets, 60 bytes
5 minute rate 0 bps
Match: protocol http url "*readme.eml*"
0 packets, 0 bytes
5 minute rate 0 bps
Match: protocol http url "*readme.exe*"
0 packets, 0 bytes
5 minute rate 0 bps
Match: protocol http url "*admin.dll*"
0 packets, 0 bytes
5 minute rate 0 bps
police:
cir 1000000 bps, bc 31250 bytes, be 31250 bytes
conformed 807 packets, 49976 bytes; actions:
drop
exceeded 0 packets, 0 bytes; actions:
drop
violated 0 packets, 0 bytes; actions:
drop
conformed 0 bps, exceed 0 bps, violate 0 bps
Задача следующая - идентифицировать хосты, с которых пошли пакеты на которых
сработал триггер. Количество хостов - где-то 80, все они подключены к 4-м
2924, т.е. запустить сниффер не получится. Вопрос - есть ли возможность
сделать идентификацию средствами самой кошки?
Второй вопрос. По выводу информации sh int
FastEthernet0/1 is up, line protocol is up
Hardware is AmdFE, address is 0002.4b62.28c1 (bia 0002.4b62.28c1)
Description: Local LAN
Internet address is 192.168.20.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:01, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/75446/0 (size/max/drops/flushes); Total output drops: 0
drops отражет те пакеты, которые отборсились в результате полиси, или что-то
еще?
Для инфо:
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(11)T2, RELEASE
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 13-Oct-02 22:45 by ccai
Image text-base: 0x8000809C, data-base: 0x8181DB20
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Cisco2621 uptime is 1 week, 4 days, 2 hours, 54 minutes
System returned to ROM by reload at 13:30:25 PST Tue Jan 7 2003
System restarted at 13:36:20 PST Tue Jan 7 2003
System image file is "flash:c2600-ik9o3s-mz.122-11.T2.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 59392K/6144K bytes of
memory.
Processor board ID JAB04230ASE (2216854019)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
I.N.
--- ifmail v.2.15dev5
* Origin: Demos online service (2:5020/400)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
Архивное /ru.cisco/65779c1b854c.html, оценка из 5, голосов 10
|