ru.cisco

 
 - RU.CISCO ---------------------------------------------------------------------
 From : Dmitry Tkachenko                     2:5010/70      10 Dec 2001  17:56:36
 To : All
 Subject : Cisco 3620 PRI Work with Q-sig ???
 -------------------------------------------------------------------------------- 
 

                                     Hi All
 
 Кто нить может точно сказать что на IOS IP Plus (А еще на каком?) работает
 Q-sig для 3620?
 Соединение для организации модемного доступа.
 Пробовал соединять с Mercator 01L и еще с другим железом - результат ноль.
 
 Собственно софт с которым пробовал.
 Cisco Internetwork Operating System Software
 IOS (tm) 3600 Software (C3620-DO3S-M), Version 12.2(2)T, RELEASE SOFTWARE
 (fc1)
 TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support
 Copyright (c) 1986-2001 by cisco Systems, Inc.
 Compiled Sat 02-Jun-01 22:07 by ccai
 Image text-base: 0x600089A8, data-base: 0x61456000
 ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
 SOFTWARE (f
 c1)
 ROM: 3600 Software (C3620-DO3S-M), Version 12.2(2)T, RELEASE SOFTWARE (fc1)
 Running default software
 cisco 3620 (R4700) processor (revision 0x81) with 59392K/6144K bytes of
 memory.
 Processor board ID 24807390
 R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
 MICA-6DM Firmware: CP ver 2730 - 5/23/2001, SP ver 2730 - 5/23/2001.
 Channelized E1, Version 1.0.
 Bridging software.
 X.25 software, Version 3.0.0.
 SuperLAT software (copyright 1990 by Meridian Technology Corp).
 Primary Rate ISDN software, Version 1.1.
 1 FastEthernet/IEEE 802.3 interface(s)
 31 Serial network interface(s)
 30 terminal line(s)
 2 Channelized E1/PRI port(s)
 DRAM configuration is 32 bits wide with parity disabled.
 29K bytes of non-volatile configuration memory.
 8192K bytes of processor board System flash (Read/Write)
 
 Вот что выдает deb isdn q931
 1d02h: ISDN Se1/1:15: RX <- SETUP pd = 8 callref = 0x1102
 1d02h: Bearer Capability i = 0x8090A3
 1d02h: Channel ID i = 0xA98381
 1d02h: Progress Ind i = 0xA590 - Reserved value
 1d02h: Progress Ind i = 0x8581 - Call not end-to-end ISDN, may have in-b
 and info
 1d02h: Called Party Number i = 0xC9, '279', Plan:Private, Type:Subscribe
 r(local)
 1d02h: Sending Complete
 1d02h: Locking Shift to Codeset 5
 1d02h: Codeset 5 IE 0x31 i = 0x81
 1d02h: Codeset 5 IE 0x32 i = 0x80
 1d02h: ISDN Se1/1:15: Incoming call id = 0x021E, dsl 0
 1d02h: ISDN Se1/1:15: NegotiateBchan: bchan 1 intid 0 serv_st 0 chan_st
 0callid
 0x0000 ev 0x90 n/w? 0
 1d02h: Negotiated int_id 0 bchan 0 cr=0x9102 callid=0x021E lo_chan 1 final
 int_i
 d/bchan 0/1 cause 0x0
 1d02h: ISDN Se1/1:15: LIF_EVENT: ces/callid 1/0x21E CALL_INCOMING
 1d02h: ISDN Se1/1:15: CALL_INCOMING dsl 0 bchan 0
 1d02h: ISDN Se1/1:15: CALL_INCOMING: call type is VOICE ALAW, bchan = 0
 1d02h: ISDN Se1/1:15: Event: Checking if call is not ISDN end to end
 1d02h: ISDN Se1/1:15: Event: Received a VOICE call from <unknown> on B0 at
 64 K
 b/s
 1d02h: ISDN Se1/1:15: RM returned call_type 1 resource type 0 response 1
 1d02h: ISDN Se1/1:15: VOICE_ANS Event: call id 0x21E, bchan 0, ces 1
 1d02h: ISDN Se1/1:15: isdn_send_connect(): msg 74, call id 0x21E, ces 0
 bchan 0,
 call type VOICE
 1d02h: ISDN Se1/1:15: RX <- SETUP pd = 8 callref = 0x1102
 1d02h: Bearer Capability i = 0x8090A3
 1d02h: Channel ID i = 0xA98381
 1d02h: Progress Ind i = 0xA590 - Reserved value
 1d02h: Progress Ind i = 0x8581 - Call not end-to-end ISDN, may have in-b
 and info
 1d02h: Called Party Number i = 0xC9, '279', Plan:Private, Type:Subscribe
 r(local)
 1d02h: Sending Complete
 1d02h: Locking Shift to Codeset 5
 1d02h: Codeset 5 IE 0x31 i = 0x81
 1d02h: Codeset 5 IE 0x32 i = 0x80
 1d02h: ISDN Se1/1:15: RX <- RELEASE_COMP pd = 8 callref = 0x1102
 1d02h: Cause i = 0x80E6 - Recovery on timer expiry
 1d02h: ISDN Se1/1:15: CCPRI_ReleaseCall(): bchan 1, call id 0x21E, call type
 VOICE
 1d02h: CCPRI_ReleaseChan released b_dsl 0 B_Chan 1
 1d02h: ISDN Se1/1:15: LIF_EVENT: ces/callid 1/0x21E CALL_DISC
 1d02h: ISDN Se1/1:15: LIF_EVENT: ces/callid 1/0x21E CALL_CLEARED
 1d02h: ISDN Se1/1:15: received CALL_CLEARED call_id 0x21E
 
 Был бы очень благодарен за любую помощь в решении вопроса.
 --- Microsoft Outlook Express 6.00.2600.0000
  * Origin: Economical Development Center (2:5010/70)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор