|
|
ru.cisco- RU.CISCO --------------------------------------------------------------------- From : Alexander V Popaduck 2:5026/45.1 19 Aug 2005 21:26:18 To : Sergey Goncharov Subject : 2610, dot1q & QoS --------------------------------------------------------------------------------
19 Aug 05 11:26, you wrote to all:
SG> Реализуема ли на C2610 следующая хотелка?
SG> - нарезать на Ethernet'е несколько dot1q сабинтерфейсов (какой IOS,
SG> сколько RAM/Flash надо?);
Вот, например:
===
w5-01-r1#sh int | inc ^E|Enc
Ethernet0/0 is up, line protocol is up
Encapsulation ARPA, loopback not set
Ethernet0/0.9 is up, line protocol is up
Encapsulation 802.1Q Virtual LAN, Vlan ID 9
w5-01-r1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(17), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 04-Sep-02 02:06 by kellythw
Image text-base: 0x80008088, data-base: 0x80CF52D4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
w5-01-r1 uptime is 2 days, 5 hours, 47 minutes
System returned to ROM by power-on
System restarted at 11:39:18 UTC Wed Aug 17 2005
System image file is "flash:c2600-is-mz.121-17.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of
memory.
Processor board ID JAD05080S36 (3828750483)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
===
Правда, есть одна проблема:
===
w5-01-r1(config-if)#ip route-cache cef
%CEF not supported with 802.1q encapsulation on subinterface
===
Alexander
--- GoldED+/W32 1.1.5-30331
* Origin: (2:5026/45.1)
Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
Архивное /ru.cisco/27524306180b.html, оценка из 5, голосов 10
|