|
ru.cisco- RU.CISCO --------------------------------------------------------------------- From : Pavel Sizykh 2:5040/72 15 Oct 2007 21:07:13 To : All Subject : unframed g703 -------------------------------------------------------------------------------- Перевел vwic 2mft-g703 в unframed режим. Однако полных 2048 не получил, судя по выделеным строкам? Почему Available bandwidth 1536?? c3640#sh int ser 0/0:0 Serial0/0:0 is up, line protocol is up Hardware is DSCC4 Serial Internet address is xxx.xxx.xxx.xxx/30 > MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec, reliability 255/255, txload 22/255, rxload 100/255 Encapsulation PPP, LCP Open Open: IPCP, loopback not set Keepalive set (10 sec) Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 4d04h Input queue: 9/75/41391/0 (size/max/drops/flushes); Total output drops: 306 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/16/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) > Available Bandwidth 1536 kilobits/sec 5 minute input rate 810000 bits/sec, 161 packets/sec 5 minute output rate 179000 bits/sec, 132 packets/sec 53945695 packets input, 884816555 bytes, 15 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 2935 input errors, 273 CRC, 1789 frame, 872 overrun, 0 ignored, 1 abort 50070359 packets output, 1414963800 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 output buffer failures, 0 output buffers swapped out 6 carrier transitions Timeslot(s) Used: UNFRAMED, SCC: 0, Transmitter delay is 0 flags --- Microsoft Outlook Express 6.00.2900.2180 * Origin: BSCOM (2:5040/72) Вернуться к списку тем, сортированных по: возрастание даты уменьшение даты тема автор
Архивное /ru.cisco/27178597139c.html, оценка из 5, голосов 10
|