ru.cisco

 
 - RU.CISCO ---------------------------------------------------------------------
 From : Andrei  Erin                         2:5020/400     21 Jun 2006  12:35:26
 To : All
 Subject : source-based routing
 -------------------------------------------------------------------------------- 
 

 Hi All,
 
 Hужно сделать маршрутизацию по source address.
 Можно сделать с route-map,есть вариант с VRF.
  
 Вот фрагмент конфигурации:
 
 ip vrf test
  rd 10.10.10.10:0
 !
 interface Loopback0
 ip vrf forwarding test
 ip address 10.10.10.10 255.255.255.255
 !
 interface FastEthernet0/0
  ip vrf receive test
  ip address 192.168.20.1 255.255.255.0
   ip policy route-map test
  !
 ip access-list standard test
  permit 192.168.20.64
 ip access-list standard vega
  permit 192.168.20.100
 !
 route-map test permit 10
  match ip address test
  set vrf test
 !
 route-map test permit 20
  match ip address vega
  set vrf test
 !
 Результат получается странный :
 
 ping vrf test 192.168.20.64
 
 Type escape sequence to abort.
 Sending 5, 100-byte ICMP Echos to 192.168.20.64, timeout is 2 seconds: !.!.!
 Success rate is 60 percent (3/5), round-trip min/avg/max = 1/1/1 ms
 
 ping vrf test 192.168.20.100
 
 Type escape sequence to abort.
 Sending 5, 100-byte ICMP Echos to 192.168.20.100, timeout is 2 seconds: !.!.!
 Success rate is 60 percent (3/5), round-trip min/avg/max = 1/2/4 ms
 
 --- ifmail v.2.15dev5.3
  * Origin: FidoNet Online - http://www.fido-online.com (2:5020/400)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор