ru.cisco

 
 - RU.CISCO ---------------------------------------------------------------------
 From : Andrey Lykhin                        2:5020/400     05 Apr 2007  08:44:15
 To : All
 Subject : Зависает 2801 при загрузке.
 -------------------------------------------------------------------------------- 
 

 2801 + c2801-ipbase-mz.124-1c.bin
 
 После того как, не выключая маршрутизатор вытащили из него флеш, и вставили
 обратно он перезагрузился и перестал загружаться до конца, виснет при
 загрузке. Что можно сделать?
 
 Тут написано, что можно вынимать и вставлять обратно флеш не выключая
 маршрутизатор:
 http://www.cisco.com/en/US/products/ps5854/prod_troubleshooting_guide09186a0080
 2c35d3.html
 
 Внизу три лога:
 1. Загрузка иоса через консольный кабель:
 2. При попытке загрузке с tftp:
 3. При обычной загрузке:
 > Загрузка иоса через консольный кабель:
 
 rommon 4 > xmodem -c 2801
 Do not start the sending program yet...
 program load complete, entry point: 0x8000f000, size: 0xc100
 
 Initializing ATA monitor library.......
          File size           Checksum   File name
          0 bytes (0x0)        0x0000    -mz.124-1c.bin (invalid)
          0 bytes (0x0)        0x0000    01.cfg (invalid)
          0 bytes (0x0)        0x0000     (invalid)
          0 bytes (0x0)        0x0000     (invalid)
          0 bytes (0x0)        0x0000     (invalid)
          0 bytes (0x0)        0x0000     (invalid)
          0 bytes (0x0)        0x0000     (invalid)
          0 bytes (0x0)        0x0000     (invalid)
          0 bytes (0x0)        0x0000    p-ios-3.1.1.27-k9.pkg (invalid)
          0 bytes (0x0)        0x0000    n-1.1.0.154.pkg (invalid)
          0 bytes (0x0)        0x0000    erprisek9-mz.124-11.T.bin (invalid)
          0 bytes (0x0)        0x0000    ersist_dbase (invalid)
 
 WARNING: All existing data in flash will be lost!
 Invoke this application only for disaster recovery.
 Do you wish to continue? y/n  [n]:  y
 Ready to receive file 2801 ...
 program load complete, entry point: 0x8000f000, size: 0xc100
 
 Initializing ATA monitor library.......
 
 Format: Drive communication & 1st Sector Write OK...
 Writing Monlib sectors.
 ...............................................................................
 .
 ..................
 Monlib write complete
 
 Format: All system sectors written. OK...
 Format: Operation completed successfully.
 
 Format of flash: complete
 program load complete, entry point: 0x8000f000, size: 0xc100
 
 Initializing ATA monitor library.......
 
 Download Complete!
 program load complete, entry point: 0x8000f000, size: 0xc100
 
 Initializing ATA monitor library.......
 
 program load complete, entry point: 0x8000f000, size: 0xd49718
 Self decompressing the image :
 #################################################
 ###############################################################################
 #
 ######## [OK]
 
 Smart Init is enabled
 smart init is sizing iomem
   ID            MEMORY_REQ         TYPE
                 0X003AA110 public buffer pools
                 0X00211000 public particle pools
                 0X000021B8 Onboard USB
 
 If any of the above Memory Requirements are
 "UNKNOWN", you may be using an unsupported
 configuration or there is a software problem and
 system operation may be compromised.
 
 Allocating additional 7714372 bytes to IO Memory.
 PMem allocated: 117440512 bytes; IOMem allocated: 16777216 bytes
 
               Restricted Rights Legend
 
 Use, duplication, or disclosure by the Government is
 subject to restrictions as set forth in subparagraph
 (c) of the Commercial Computer Software - Restricted
 Rights clause at FAR sec. 52.227-19 and subparagraph
 (c) (1) (ii) of the Rights in Technical Data and Computer
 Software clause at DFARS sec. 252.227-7013.
 
            cisco Systems, Inc.
            170 West Tasman Drive
            San Jose, California 95134-1706
 Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(1c), RELEASE
 SO
 FTWARE (fc1)
 Technical Support: http://www.cisco.com/techsupport
 Copyright (c) 1986-2005 by Cisco Systems, Inc.
 Compiled Wed 26-Oct-05 08:42 by evmiller
 Image text-base: 0x6007ECA0, data-base: 0x61480000
 
 Port Statistics for unclassified packets is not turned on.
 > При попытке загрузке с tftp:
 
 rommon 6 > tftpdnld
 
           IP_ADDRESS: 10.100.2.70
       IP_SUBNET_MASK: 255.0.0.0
      DEFAULT_GATEWAY: 10.100.1.11
          TFTP_SERVER: 10.100.1.210
            TFTP_FILE: c2801-ipbase-mz.124-1c.binget_mac_address(): Search
 T_IDPR
 OM_MACADDR (0xc3) failed
 
 Illegal MAC address.
 
 usage: tftpdnld [-hr]
   Use this command for disaster recovery only to recover an image via TFTP.
   Monitor variables are used to set up parameters for the transfer.
   (Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
   "ctrl-c" or "break" stops the transfer before flash erase begins.
 
   The following variables are REQUIRED to be set for tftpdnld:
             IP_ADDRESS: The IP address for this unit
         IP_SUBNET_MASK: The subnet mask for this unit
        DEFAULT_GATEWAY: The default gateway for this unit
            TFTP_SERVER: The IP address of the server to fetch from
              TFTP_FILE: The filename to fetch
 
   The following variables are OPTIONAL:
           TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
       TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
           TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
          TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes
 (default=1)
                FE_PORT: 0= (default), 1
          FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                         4=Auto (default)
 
   Command line options:
    -h: this help screen
    -r: do not write flash, load to DRAM only and launch image
 
 rommon 7 >
 > При обычной загрузке:
 
 System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
 Technical Support: http://www.cisco.com/techsupport
 Copyright (c) 2004 by cisco Systems, Inc.
 PLD version 0x10
 GIO ASIC version 0x127
 c2801 processor with 131072 Kbytes of main memory
 Main memory is configured to 64 bit mode with parity disabled
 Readonly ROMMON initialized
 program load complete, entry point: 0x8000f000, size: 0xc100
 
 Initializing ATA monitor library.......
 program load complete, entry point: 0x8000f000, size: 0xc100
 
 Initializing ATA monitor library.......
 
 program load complete, entry point: 0x8000f000, size: 0xd49718
 Self decompressing the image :
 #################################################
 ###############################################################################
 #
 ######## [OK]
 
 Smart Init is enabled
 smart init is sizing iomem
   ID            MEMORY_REQ         TYPE
                 0X003AA110 public buffer pools
                 0X00211000 public particle pools
                 0X000021B8 Onboard USB
 
 If any of the above Memory Requirements are
 "UNKNOWN", you may be using an unsupported
 configuration or there is a software problem and
 system operation may be compromised.
 
 Allocating additional 7714372 bytes to IO Memory.
 PMem allocated: 117440512 bytes; IOMem allocated: 16777216 bytes
 
               Restricted Rights Legend
 
 Use, duplication, or disclosure by the Government is
 subject to restrictions as set forth in subparagraph
 (c) of the Commercial Computer Software - Restricted
 Rights clause at FAR sec. 52.227-19 and subparagraph
 (c) (1) (ii) of the Rights in Technical Data and Computer
 Software clause at DFARS sec. 252.227-7013.
 
            cisco Systems, Inc.
            170 West Tasman Drive
            San Jose, California 95134-1706
 Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(1c), RELEASE
 SO
 FTWARE (fc1)
 Technical Support: http://www.cisco.com/techsupport
 Copyright (c) 1986-2005 by Cisco Systems, Inc.
 Compiled Wed 26-Oct-05 08:42 by evmiller
 Image text-base: 0x6007ECA0, data-base: 0x61480000
 
 Port Statistics for unclassified packets is not turned on.
 
 --- ifmail v.2.15dev5.3
  * Origin: FidoNet Online - http://www.fido-online.com (2:5020/400)
 
 

Вернуться к списку тем, сортированных по: возрастание даты  уменьшение даты  тема  автор